Signet PDA103C 5 kHz Induction Loop 5.5 V
- N° de stock RS:
- 522-935
- Référence fabricant:
- PDA103C
- Fabricant:
- Signet
Sous-total (1 unité)*
213,81 €
(TVA exclue)
258,71 €
(TVA incluse)
Ajouter 1 unité pour bénéficier d'une livraison gratuite
En stock
- 16 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 68 unité(s) expédiée(s) à partir du 05 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 213,81 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 522-935
- Référence fabricant:
- PDA103C
- Fabricant:
- Signet
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Signet | |
| Product Type | Induction Loop | |
| Maximum Square Room Coverage | 7 x 7 m | |
| Kit Contents | TX121 Counter Loop, AMT Tie/Desk Microphone, (2) Loop in Use Sticker | |
| Operating Voltage | 5.5 V | |
| Weight | 1.3kg | |
| Amplifier Height | 56mm | |
| Maximum Frequency Response | 5kHz | |
| Minimum Frequency Response | 120Hz | |
| Plug Type | Type G | |
| Portable System | Yes | |
| Amplifier Length | 175mm | |
| Amplifier Width | 136mm | |
| Distortion | 0.1% | |
| Standards/Approvals | EN60118-4, BS 7594 | |
| Sélectionner tout | ||
|---|---|---|
Marque Signet | ||
Product Type Induction Loop | ||
Maximum Square Room Coverage 7 x 7 m | ||
Kit Contents TX121 Counter Loop, AMT Tie/Desk Microphone, (2) Loop in Use Sticker | ||
Operating Voltage 5.5 V | ||
Weight 1.3kg | ||
Amplifier Height 56mm | ||
Maximum Frequency Response 5kHz | ||
Minimum Frequency Response 120Hz | ||
Plug Type Type G | ||
Portable System Yes | ||
Amplifier Length 175mm | ||
Amplifier Width 136mm | ||
Distortion 0.1% | ||
Standards/Approvals EN60118-4, BS 7594 | ||
- Pays d'origine :
- GB
Counter Induction Loop & Microphone System
An induction loop kit with counter top loop and microphone that covers the area surrounding a ticket desk, reception desk or counter.
Features & Benefits
* Compact free standing design
* 1 x 3.5mm microphone input
* Compatible with SigNET's unique Outreach plate
* Input limit, Output Peak and Power On indicators
* Adjustable drive and limit controls
* Optional wall mounting
* Meets or exceeds the requirements of BS7594 and EN60118-4 when installed correctly
Induction Loop
What are Induction Loops? Induction loop systems help hearing impaired people who use a hearing aid or loop listener to hear sounds more clearly by reducing or cutting out background noise. An induction loop is a cable that circles the listening area. It is fed by current from a loop amplifier. The amplifier gets its signal from a microphone placed in front of the person speaking or by means of a direct connection from another sound source, such as a sound system. The resulting electric current in the loop produces a magnetic field, which corresponds to the sound. You can then pick up this magnetic field if you are sitting within the area of the loop and your hearing aid - or loop listening aid - is switched to 'T'. You will need to adjust your own hearing aid for volume. More than one person can benefit from a loop installed in a room as long as they each have a hearing aid set to 'T', or a loop listener. You are not wired to any other equipment and you are therefore free to listen from anywhere within the loop and to move around.
Supplied with
PDA102 amplifier, AMT tie/desk microphone, TX121 counter loop cable and two "loop in-use" stickers