RS PRO Red Indicator Lamp Multichip, Midget Groove Base, 6 mm Diameter, 40mcd
- N° de stock RS:
- 210-018
- Numéro d'article Distrelec:
- 304-18-567
- Fabricant:
- RS PRO
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
7,58 €
(TVA exclue)
9,17 €
(TVA incluse)
- N° de stock RS:
- 210-018
- Numéro d'article Distrelec:
- 304-18-567
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Indicator Lamp | |
| Light Output Colour | Red | |
| Lamp Base | Midget Groove | |
| Chip Type | Multichip | |
| Diameter | 6mm | |
| Length | 15.25mm | |
| Viewing Angle | 180 ° | |
| Peak Wavelength | 630nm | |
| Life Hours | 100000h | |
| Luminous Intensity | 40mcd | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Indicator Lamp | ||
Light Output Colour Red | ||
Lamp Base Midget Groove | ||
Chip Type Multichip | ||
Diameter 6mm | ||
Length 15.25mm | ||
Viewing Angle 180 ° | ||
Peak Wavelength 630nm | ||
Life Hours 100000h | ||
Luminous Intensity 40mcd | ||
- Pays d'origine :
- GB
Midget Groove Multi-Chip LEDs, T1 3/4
Brought to you under the trusted RS Brand, this multi-chip LED indicator lamp has six LED's, ensuring a level of brightness on par with that of incandescent filament lamp equivalents, but with lower current consumption and longer life. The midget groove shape of this indicator lamp assures quick and secure mounting.
Features and Benefits:
• Robust and Compact lamp
• LED lamps contain a current limiting resistor
• Positive to be connected to the base contact
• Size T1 3/4
Multi-Chip LEDs
Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps. Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps.
Very high immunity to shock and vibration
Current consumption is between 50 and 65% lower
Lower operating temperatures
Note
The operating voltage must not be exceeded by more than 10% as this will result in reduced life expectancy.
Liens connexes
- RS PRO Red LED Indicator Lamp Midget Groove Base 40mcd
- RS PRO Red LED Indicator Lamp Midget Groove Base 40mcd
- RS PRO Red LED Indicator Lamp Midget Groove Base 40mcd
- Signal Construct Red Indicator Lamp Multichip 5.6 mm Diameter, 120mcd
- Signal Construct Blue Indicator Lamp Multichip 5.6 mm Diameter
- RS PRO Red Indicator Lamp Multichip Midget Groove Base, 6 mm Diameter
- RS PRO Green Indicator Lamp Multichip 6 mm Diameter, 35mcd
- Signal Construct White Indicator Lamp Multichip 5.6 mm Diameter, 880mcd