SAM 1-1/4 in 3/4 in Drive Impact Socket, 57mm length
- N° de stock RS:
- 283-0028
- Référence fabricant:
- NC-1"1/4
- Fabricant:
- SAM
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 283-0028
- Référence fabricant:
- NC-1"1/4
- Fabricant:
- SAM
Spécifications
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SAM | |
| Product Type | Impact Socket | |
| Unit of Measure | Imperial | |
| Socket Size | 1-1/4 in | |
| Socket Type | 6 Point | |
| Drive Size | 3/4 in | |
| Overall Length | 57mm | |
| Finish | Burnished | |
| Standards/Approvals | NF ISO 1174-2, NF ISO 1711-1, NF ISO 2725-2 | |
| Drive Type | 6 Point Socket | |
| Sélectionner tout | ||
|---|---|---|
Marque SAM | ||
Product Type Impact Socket | ||
Unit of Measure Imperial | ||
Socket Size 1-1/4 in | ||
Socket Type 6 Point | ||
Drive Size 3/4 in | ||
Overall Length 57mm | ||
Finish Burnished | ||
Standards/Approvals NF ISO 1174-2, NF ISO 1711-1, NF ISO 2725-2 | ||
Drive Type 6 Point Socket | ||
Statut RoHS : Exempté
- Pays d'origine :
- JP
The SAM Impact Socket is designed to withstand the forces transmitted by impact machines such as power screwdriver, manual, electric or pneumatic nut runners which is used in industry or the automotive sector.
Very good resistance to wear
Burnished finish
Liens connexes
- SAM 1-1/2 in 3/4 in Drive Impact Socket, 57mm length
- SAM 1-5/16 in 3/4 in Drive Impact Socket, 57mm length
- SAM 1-7/16 in 3/4 in Drive Impact Socket, 57mm length
- SAM 40 mm 3/4 in Drive Impact Socket, 57mm length
- SAM 1-1/18 in 3/4 in Drive Impact Socket, 53mm length
- SAM 1-1/16 in 3/4 in Drive Impact Socket, 53mm length
- SAM 3/4 in 3/4 in Drive Impact Socket, 51mm length
- SAM 1-5/8 in 3/4 in Drive Impact Socket, 58mm length