RS PRO 19 mm ID Zinc Plated Steel Hydraulic Tubing, 2 m
- N° de stock RS:
- 400-7746
- Fabricant:
- RS PRO
Visuel non contractuel
Sous-total (3 unités, dans un pack de 3)*
204,66 €
(TVA exclue)
247,65 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 3 + | 68,22 € | 204,66 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 400-7746
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Hydraulic Tubing | |
| Outside Diameter | 25mm | |
| Inside Diameter | 19mm | |
| Material | Zinc Plated Steel | |
| Thickness | 3mm | |
| Length | 2m | |
| Finish | Zinc Plated | |
| Weight | 1.6kg/m | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 120°C | |
| Maximum Operating Pressure | 339 bar | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Hydraulic Tubing | ||
Outside Diameter 25mm | ||
Inside Diameter 19mm | ||
Material Zinc Plated Steel | ||
Thickness 3mm | ||
Length 2m | ||
Finish Zinc Plated | ||
Weight 1.6kg/m | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 120°C | ||
Maximum Operating Pressure 339 bar | ||
Statut RoHS : Exempté
- Pays d'origine :
- ES
Zinc Plated, Yellow Passivated Finish
Surface finish has a plating thickness of 8 to 12 microns which provides high corrosion resistance and a similar appearance to the EO range of hydraulic tube fittings
Hydraulic Seamless Tube
Metric sizes of cold drawn steel tube in fine grain quality (RR) material type ST37.4 to DIN 1630 NBK. Tube manufactured to DIN 2391/C and supplied in 2m lengths, with capped ends to prevent dirt ingress. Tensile strength RM is 340N/mm2 minimum. Yield point ReH is 235N/mm2 minimum. Ductile yield A5 (longit) is 25% minimum. Temperature range (without pressure reduction) is -40°C to +120°C. The tubes are compatible with the range of EO hydraulic tube fittings, for fluid applications.
Standards
DIN 2391/C
Liens connexes
- RS PRO 16 mm ID Zinc Plated Steel Hydraulic Tubing, 2 m
- RS PRO 4 mm ID Zinc Plated Steel Hydraulic Tubing, 2 m
- RS PRO 7 mm ID Zinc Plated Steel Hydraulic Tubing, 2 m
- RS PRO 12 mm ID Zinc Plated Steel Hydraulic Tubing, 2 m
- RS PRO 5 mm ID Zinc Plated Steel Hydraulic Tubing, 2 m
- RS PRO 18 mm ID Zinc Plated Steel Hydraulic Tubing, 2 m
- RS PRO 9 mm ID Zinc Plated Steel Hydraulic Tubing, 2 m
- RS PRO 14 mm ID Zinc Plated Steel Hydraulic Tubing, 2 m