Self Aspirating External Gear Pump, 1:8 Tapered Shaft

New principle for the housing sealing, giving long housing service life
Long service life for seals, even at maximum temperature
Plain bearing for high loads
Monoblock bearing
Simple and robust design
New principle of hydrostatic side clearance compensation

Note

Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B₂₀ ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B₁₀≥100.

Gear Pumps

Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.

Sélectionner tout	Attribut	Valeur
	Marque	Bosch Rexroth
	Displacement	8cm³
	Continuous Operating Pressure	250bar
	Maximum Operating Pressure	280 bar
	Minimum Rotational Speed	700rpm
	Manufacturer Series	AZP
	Direction of Rotation	Clockwise
	Maximum Rotational Speed	4000rpm
	Minimum Speed At Maximum Pressure	1000rpm
	Body Dimensions	92.5 x 87 x 112mm
	Weight	3.3kg
	Body Height	112mm
	Body Length	92.5mm
	Body Width	87mm

	Sélectionner tout
	Marque Bosch Rexroth
	Displacement 8cm³
	Continuous Operating Pressure 250bar
	Maximum Operating Pressure 280 bar
	Minimum Rotational Speed 700rpm
	Manufacturer Series AZP
	Direction of Rotation Clockwise
	Maximum Rotational Speed 4000rpm
	Minimum Speed At Maximum Pressure 1000rpm
	Body Dimensions 92.5 x 87 x 112mm
	Weight 3.3kg
	Body Height 112mm
	Body Length 92.5mm
	Body Width 87mm

Bosch Rexroth Hydraulic Gear Pump 0510425043, 8cm³

FRAIS de livraison offerts pour toute commande de plus de 75,00 €

Self Aspirating External Gear Pump, 1:8 Tapered Shaft

Note

Liens connexes