RS PRO Green, Yellow 1 mm² Hook Up Wire, 11 AWG, 32/0.2 mm, 100 m, Silicone Rubber
- N° de stock RS:
- 265-3038
- Numéro d'article Distrelec:
- 304-05-569
- Fabricant:
- RS PRO
Sous-total (1 bobine de 100 mètres)*
101,31 €
(TVA exclue)
122,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 11 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Bobine(s) | la bobine | le mètre* |
|---|---|---|
| 1 + | 101,31 € | 1,013 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 265-3038
- Numéro d'article Distrelec:
- 304-05-569
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Hook Up Wire | |
| Cross Sectional Area | 1 mm² | |
| Jacket Colour | Green, Yellow | |
| American Wire Gauge | 11AWG | |
| Core Strands | 32/0.2 mm | |
| Cable Length | 100m | |
| Voltage | 500 V | |
| Outside Diameter | 2.5 mm | |
| Maximum Operating Temperature | 180°C | |
| Conductor Material | Copper | |
| Standards/Approvals | BS 6195 tabl4 | |
| Jacket Material | Silicone Rubber | |
| Sub Type | Silicone Rubber Wire | |
| Minimum Operating Temperature | -60°C | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Hook Up Wire | ||
Cross Sectional Area 1 mm² | ||
Jacket Colour Green, Yellow | ||
American Wire Gauge 11AWG | ||
Core Strands 32/0.2 mm | ||
Cable Length 100m | ||
Voltage 500 V | ||
Outside Diameter 2.5 mm | ||
Maximum Operating Temperature 180°C | ||
Conductor Material Copper | ||
Standards/Approvals BS 6195 tabl4 | ||
Jacket Material Silicone Rubber | ||
Sub Type Silicone Rubber Wire | ||
Minimum Operating Temperature -60°C | ||
- Pays d'origine :
- TR
RS PRO Harsh Environment Wire - Silicone Rubber
Brought to you by RS PRO, Tinned copper conductors covered with 0.8 mm wall thickness silicone rubber to BS 6195 table 4. These cables will satisfy a wide number of applications related to medical, electronic or electrical equipment which may be operated in environmental conditions. Perfect in situations where ozone, corona discharge, radiation, heat, weathering or the normally adverse effects of a wide range of oils, solvents, etc, may be encountered. All models are highly reliable and excellent quality.
Features and Benefits
• Tinned Copper
• Silicone rubber insulation
• Various wire sizes
• 0.8 mm wall thickness
What is harsh environment wire?
Defined by its name, harsh environment wire is cable suitable for less than friendly environments. Typically used as hook up wire, each reel performs to an optimum level within harsher areas. High temperature can be a massive threat in terms of electronics, causing all kinds of health and safety risks. These RS PRO cables provide excellent resistance to such problems.
Where is harsh environment wire used?
Any electronic devices situated within harsh environments would benefit from this type of wire. Laboratories would be be a good example, as they are areas which could have toxic and potentially damaging gasses that interfere with wires. As as example, some areas using these cables would be:
• Construction sites
• Car engines
• Aeroplanes
• Petrol stations
Liens connexes
- RS PRO Red 1mm² Hook Up Wire 100m, Silicone Rubber Insulation
- RS PRO Black 1mm² Hook Up Wire 100m, Silicone Rubber Insulation
- RS PRO Orange 1mm² Hook Up Wire 100m, PVC Insulation
- RS PRO Green 1mm² Hook Up Wire 100m, PVC Insulation
- RS PRO Grey 1mm² Hook Up Wire 100m, PVC Insulation
- RS PRO Pink 1mm² Hook Up Wire 100m, PVC Insulation
- RS PRO Red 1mm² Hook Up Wire 100m, PVC Insulation
- RS PRO Brown 1mm² Hook Up Wire 100m, PVC Insulation
