Allen Bradley Guardmaster 440h Safety Hinge Switch

Visuel non contractuel

Voir l’ensemble des Hinge Switches

Sous-total (1 unité)*

47,29 €

(TVA exclue)

57,22 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 1 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +47,29 €

*Prix donné à titre indicatif

N° de stock RS:
439-1366
Référence fabricant:
440H-S34010
Fabricant:
Allen Bradley Guardmaster
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Allen Bradley Guardmaster

Product Type

Safety Hinge Switch

Series

440h

Housing Material

Plastic

Number of Cable Entries

1

Cable Entry Size

M16

IP Rating

IP67

Hinge Material

Stainless Steel

Minimum Operating Temperature

-20°C

Trigger Angle Range

3-11°

Shaft Length

50mm

Maximum Operating Temperature

80°C

Standards/Approvals

No

Mechanical Life

1000000Cycles

Statut RoHS : Exempté

Pays d'origine :
DO

Allen Bradley GuardmasterSprite Safety Hinge Switch, 2NC, M16 - 440H-S34010


This Sprite safety hinge switch from Rockwell Automation's Allen Bradley Guardmaster range isolates power when a connected door is opened. It does double duty, protecting machines from damage and keeping staff safe. It comes in a miniature case body of 75 (height) x 25mm (width), the smallest size for an interlock switch. This makes it ideal for use with small machines like printers, copiers and domestic appliances. The cam is adjustable, to prevent over-sensitive tripping.

Features and Benefits


• Two NC (normally closed) contacts ensure a default safe setting

• Contacts are IP67 (ingress protection) sealed to prevent exposure to water and dust

• Long (50mm) shaft keeps the fitting secure

• Head facilities are rotatable, allowing for four different shaft positions

• Can be used with Guardlink, which reduces the connection time of the safety system

Standards and Certifications


• EN 1088 (European Norm)

• IEC 947-5-1 (International Electrotechnical Commission)

How do I maintain this switch?


Routinely check the switching circuit is operating and hasn't been tampered with. You can apply tamper-evident varnish to the fixings to make this easier to spot. Inspect the conduit entry and shaft for loss of sealing. Twice a year you should isolate power and inspect the terminals for tightness. Clean out any dirt before reinstating the unit.

Sprite 3


A miniature hinge operated safety interlock switch with 2 sets of contacts and a full IP67 ingress rating. Particularly useful for light duty hinged guard doors, covers or flaps. Cam may be adjusted in-situ to assist in accurate installation and minimise nuisance tripping

Miniature case (75mm x 25mm)

Rotateable head facilitates; 4 possible shaft positions

Adjustable operating speed

Make-before-break contacts

Forced guided contacts - complies with EN 1088, IEC 947-5-1

Hinge Switch


Note

These are not to be used for load bearing applications

Liens connexes

Recently viewed