Siemens 3SE5 Safety Hinge Switch 1 NO/1 NC
- N° de stock RS:
- 227-961
- Référence fabricant:
- 3SE5232-0HU22
- Fabricant:
- Siemens
Sous-total (1 unité)*
61,11 €
(TVA exclue)
73,94 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 25 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 61,11 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 227-961
- Référence fabricant:
- 3SE5232-0HU22
- Fabricant:
- Siemens
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Siemens | |
| Product Type | Safety Hinge Switch | |
| Series | 3SE5 | |
| Contact Configuration | 1 NO/1 NC | |
| Housing Material | Plastic | |
| Number of Cable Entries | 2 | |
| Terminal Type | Screw | |
| IP Rating | IP65 | |
| Cable Entry Size | M20 x 1.5 | |
| Minimum Operating Temperature | -25°C | |
| Shaft Length | 52.8mm | |
| Contact DC Voltage | 24V dc | |
| Contact AC Voltage | 240V ac | |
| Contact Current | 10A | |
| Trigger Angle Range | 10 ° | |
| Maximum Operating Temperature | 65°C | |
| Standards/Approvals | No | |
| Width | 31mm | |
| Length | 92mm | |
| Mechanical Life | 1000000Cycles | |
| Sélectionner tout | ||
|---|---|---|
Marque Siemens | ||
Product Type Safety Hinge Switch | ||
Series 3SE5 | ||
Contact Configuration 1 NO/1 NC | ||
Housing Material Plastic | ||
Number of Cable Entries 2 | ||
Terminal Type Screw | ||
IP Rating IP65 | ||
Cable Entry Size M20 x 1.5 | ||
Minimum Operating Temperature -25°C | ||
Shaft Length 52.8mm | ||
Contact DC Voltage 24V dc | ||
Contact AC Voltage 240V ac | ||
Contact Current 10A | ||
Trigger Angle Range 10 ° | ||
Maximum Operating Temperature 65°C | ||
Standards/Approvals No | ||
Width 31mm | ||
Length 92mm | ||
Mechanical Life 1000000Cycles | ||
3SE5 Hinge Switch
The SIRIUS 3SE5 Series hinge switch is designed for monitoring hinged doors and flaps. These mechanical position switches offer excellent protection from tampering thanks to the fixed, positive pivoting point connection between switch and door hinge. They have a standard enclosure according to EN 50047 and EN 50041 and a very small operating angle. Simultaneous shut down and signalling is provided in addition by the snap-action contacts.
For the mechanical monitoring of protective doors or flaps
Protection up to Cat 4 (EN 954-1), Up to SIL 3 IEC 62061
Snap on contacts
Simple, fast wiring offers approx 20 to 25% reduction in connection time
Cable entry M20 x 1.5
Actuator head can be rotated in 22.5° increments
Hinge Switch
Note
Actuators are supplied, accessories are for spares.
Liens connexes
- Siemens 3SE5 Safety Hinge Switch 1 NO/1 NC
- Siemens 3SE5 Safety Hinge Switch 1 NO/2 NC
- Siemens 3SE5 Safety Hinge Switch
- Siemens 3SE5 Series Safety Enabling Switch 1 NO/1 NC, IP65
- Siemens 3SE5 Series Safety Enabling Switch 1 NO/2 NC, IP65
- Banner SI Safety Hinge Switch 1 NO/2 NC
- Schmersal TESK Safety Hinge Switch 1 NO/2 NC
- Schmersal TC 236 Safety Hinge Switch 1 NO/1 NC