RS PRO, Plain Brass Hex Nut, DIN 934, M4
- N° de stock RS:
- 483-2508
- Fabricant:
- RS PRO
Offre groupée disponible
Sous-total (1 sachet de 250 unités)*
18,10 €
(TVA exclue)
21,90 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 16 unité(s) expédiée(s) à partir du 29 décembre 2025
- Plus 140 unité(s) expédiée(s) à partir du 29 décembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Sachet(s) | Le Sachet | Prix par unité* |
|---|---|---|
| 1 - 4 | 18,10 € | 0,072 € |
| 5 - 9 | 17,18 € | 0,069 € |
| 10 - 29 | 16,28 € | 0,065 € |
| 30 + | 15,20 € | 0,061 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 483-2508
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Imperial or Metric | Metric | |
| Nut Type | Hex Full | |
| Thread Size | M4 | |
| Material | Brass | |
| Type | Full | |
| Finish | Plain | |
| Width | 7.0mm | |
| Overall Height | 3.20mm | |
| Standards Met | DIN 934 | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Imperial or Metric Metric | ||
Nut Type Hex Full | ||
Thread Size M4 | ||
Material Brass | ||
Type Full | ||
Finish Plain | ||
Width 7.0mm | ||
Overall Height 3.20mm | ||
Standards Met DIN 934 | ||
RS PRO Brass Hex Nut, Plain, M4
Some of the most common nuts available, hex nuts are popular for their tight fit and durability. These small M4-sized brass hex nuts from RS PRO can be used with anchors, bolts and threaded rods – as well as any other fastener with machine screw threads. The hexagonal, six-sided shape allows them to be tightened and loosened easily with a simple spanner.
Made from solid brass, these hex nuts are hardwearing and corrosion-resistant. Because brass oxidises slower than other materials, the nuts are well-suited to outdoor use and water environments without having to worry about rust. It's also anti-magnetic, so they remain unaffected by magnetic fields.
Part of the RS PRO range, these nuts have been tested for quality and safety. They conform to the international metric standard DIN 934 (Deutsches Institut für Normung, or the German Institute for Standardisation) for industrial fasteners.
Made from solid brass, these hex nuts are hardwearing and corrosion-resistant. Because brass oxidises slower than other materials, the nuts are well-suited to outdoor use and water environments without having to worry about rust. It's also anti-magnetic, so they remain unaffected by magnetic fields.
Part of the RS PRO range, these nuts have been tested for quality and safety. They conform to the international metric standard DIN 934 (Deutsches Institut für Normung, or the German Institute for Standardisation) for industrial fasteners.
Features and Benefits
• Hex nut
• Made from corrosion-resistant brass
• M4 thread size
• Width of 7 mm
• Plain finish
• Full type
• Not affected by magnetic fields
• Conforms to international standard DIN 934
• Complies with Electrostatic Control Standards ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007
• Made from corrosion-resistant brass
• M4 thread size
• Width of 7 mm
• Plain finish
• Full type
• Not affected by magnetic fields
• Conforms to international standard DIN 934
• Complies with Electrostatic Control Standards ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Note
Please note IMDS is not a regulatory requirement and is currently not supported by RS PRO