Wiha 9 piece L pieces Hex Key Set, Hex size 1.5 to 10 mm
- N° de stock RS:
- 614-0823
- Référence fabricant:
- 01174
- Fabricant:
- Wiha
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
1 jeu
7,84 €
(TVA exclue)
9,49 €
(TVA incluse)
- N° de stock RS:
- 614-0823
- Référence fabricant:
- 01174
- Fabricant:
- Wiha
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Wiha | |
| Product Type | Hex Key Set | |
| Unit of Measure | pieces | |
| Number of Pieces | 9 | |
| Shape | L | |
| Hex Size | 1.5 to 10 mm | |
| Short or Long Arm | Short | |
| End Type | Hex Ball End | |
| Finish | Chrome Plated, Manganese Phosphated, Nickel Plated | |
| Material | Chrome Vanadium Steel | |
| Standards/Approvals | DIN 6911, DIN 6912, Based on ISO 2936L, Based on ASME B18.3, ISO 2936K | |
| Sélectionner tout | ||
|---|---|---|
Marque Wiha | ||
Product Type Hex Key Set | ||
Unit of Measure pieces | ||
Number of Pieces 9 | ||
Shape L | ||
Hex Size 1.5 to 10 mm | ||
Short or Long Arm Short | ||
End Type Hex Ball End | ||
Finish Chrome Plated, Manganese Phosphated, Nickel Plated | ||
Material Chrome Vanadium Steel | ||
Standards/Approvals DIN 6911, DIN 6912, Based on ISO 2936L, Based on ASME B18.3, ISO 2936K | ||
Statut RoHS : Exempté
- Pays d'origine :
- CN
Wera Hex Key Set
Hex keys are considered a household essential, especially if users build a lot of flat pack furniture. They are simple tools that make a big difference. Those that have a variant of sizes and thicknesses will be able to carry out many different jobs in domestic and commercial applications.
Features and Benefits
• Our range of hex keys from Wera are made up from a chrome vanadium molybdenum steel, ensuring optimal strength and a long tool shelf life
• Our range features options that are with or without a ball end, which allows users to screw at an angle
• Make use of both ends of the hex key
Did you know?
A Hex Key is commonly referred to as an Allen Key, this is because Allen was the original manufacturer of the Hex key.
Also, a hex key can be reconditioned using an electrical grinder, or similar type of equipment. Through removing the worn out part, the hex key has the capability of functioning like its brand new again – Although this type of maintenance should be minimal if the hex key is cared for and kept in a good condition.
Liens connexes
- Wiha 7 piece L Shape Metric Hex Key Set, 1.5 → 6mm
- Wiha 10 piece L Shape Metric Hex Key Set, 1.5 → 10mm
- Wiha 9 piece L Shape Metric Hex Key Set, 1.5 → 10mm
- Wiha 11 piece L Shape Metric Hex Key Set, 1.5 → 10mm
- Wiha L Shape Metric Hex Key Set, 2.5mm
- RS PRO 10 piece L Shape Metric Hex Key Set, 1.5 → 10mm
- Teng Tools 7 piece L Shape Metric Hex Key Set, 2.5 → 10mm
- RS PRO 9 piece L Shape Metric Hex Key Set, 1.5 → 10mm

