RS PRO Heating Element, 4in, 235 W, 220 V ac
- N° de stock RS:
- 860-6827
- Fabricant:
- RS PRO
Offre groupée disponible
Sous-total (1 unité)*
19,89 €
(TVA exclue)
24,07 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 131 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 19,89 € |
| 5 - 9 | 19,11 € |
| 10 + | 18,68 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 860-6827
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Element Type | Cartridge Heater | |
| Power Rating | 235 W | |
| Supply Voltage | 220 V ac | |
| Length | 4in | |
| Diameter | 1/4 in | |
| Lead Length | 10in | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Element Type Cartridge Heater | ||
Power Rating 235 W | ||
Supply Voltage 220 V ac | ||
Length 4in | ||
Diameter 1/4 in | ||
Lead Length 10in | ||
- Pays d'origine :
- IN
Cartridge Heaters- Imperial Sizes
Cartridge heaters have high temperature lead wires that can stand temperature of up to 450̊C
High impact ceramic cap suitable for high vibration applications
Deep holes in ceramic cap prevents fraying of lead when bent
Nickel-chromium resistance wire for maximum heater life
TIG welded end disc prevents contamination and moisture absorption
Fiberglass lead wire insulation
10" Lead wires
High impact ceramic cap suitable for high vibration applications
Deep holes in ceramic cap prevents fraying of lead when bent
Nickel-chromium resistance wire for maximum heater life
TIG welded end disc prevents contamination and moisture absorption
Fiberglass lead wire insulation
10" Lead wires
Cartridge Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Designed to provide localised heat to a restricted work area requiring close thermal control
Cartridge heaters have low/moderate watt density elements consisting of helical wire coils on ceramic former or high watt density elements with the heating element located close to the sheath, which is swaged to improve heat conduction
All units supplied with instruction leaflet
Cartridge heaters have low/moderate watt density elements consisting of helical wire coils on ceramic former or high watt density elements with the heating element located close to the sheath, which is swaged to improve heat conduction
All units supplied with instruction leaflet