Acim Jouanin Finned Tubular Heater, 370mm, 750 W, 230V ac
- N° de stock RS:
- 374-2303
- Référence fabricant:
- RA 2652 750
- Fabricant:
- Acim Jouanin
Offre groupée disponible
Sous-total (1 unité)*
47,65 €
(TVA exclue)
57,66 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 12 unité(s) expédiée(s) à partir du 25 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 47,65 € |
| 5 - 9 | 46,22 € |
| 10 + | 44,32 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 374-2303
- Référence fabricant:
- RA 2652 750
- Fabricant:
- Acim Jouanin
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Acim Jouanin | |
| Product Type | Finned Tubular Heater | |
| Power Rating | 750W | |
| Overall Length | 370mm | |
| Maximum Supply Voltage | 230V ac | |
| Peak Temperature | 200°C | |
| Standards/Approvals | REACH and RoHS | |
| Supply Voltage | 230V ac | |
| Sélectionner tout | ||
|---|---|---|
Marque Acim Jouanin | ||
Product Type Finned Tubular Heater | ||
Power Rating 750W | ||
Overall Length 370mm | ||
Maximum Supply Voltage 230V ac | ||
Peak Temperature 200°C | ||
Standards/Approvals REACH and RoHS | ||
Supply Voltage 230V ac | ||
- Pays d'origine :
- FR
ACIM Jouanin Strip Heater
The ACIM Jouanin flat bracket 750W strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C.
Note:
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning:
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Features and Benefits
Minimum recommended airspeed is 2.5m/s
Rectangular finned resistors on stainless steel shielded tube
The supply voltage is 230VAC
RA Series Blade Resistor Heaters
Rectangular finned resistors on stainless steel shielded tube.
Designed to heat air or gas by natural or forced convection.
Used in heater fans and static batteries, dryers and drying tunnels.
Minimum recommended air speed is 2.5
Strip Heating Elements
Note
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them
Warning
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Approvals
UL Recognised; CSA Certified