Transcend M.2 64 GB Internal SSD
- N° de stock RS:
- 683-165
- Référence fabricant:
- TS64GMTS560TI-VS1
- Fabricant:
- Transcend
Sous-total (1 unité)*
89,18 €
(TVA exclue)
107,91 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Pénurie d'approvisionnement
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Notre stock actuel est limité et nos fournisseurs s'attendent à des pénuries.
Unité | Prix par unité |
|---|---|
| 1 + | 89,18 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 683-165
- Référence fabricant:
- TS64GMTS560TI-VS1
- Fabricant:
- Transcend
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Transcend | |
| Product Type | SSD | |
| Sub Type | SSD | |
| Memory Size | 64GB | |
| Internal/External | Internal | |
| Industrial Grade | Yes | |
| Form Factor | M.2 | |
| NAND Type | 3D | |
| Interface Type | SATA III 6 Gb/S | |
| Maximum Operating Temperature | 85°C | |
| Minimum Operating Temperature | -40°C | |
| Height | 3.58mm | |
| Length | 42mm | |
| Width | 22mm | |
| Standards/Approvals | UKCA | |
| Sélectionner tout | ||
|---|---|---|
Marque Transcend | ||
Product Type SSD | ||
Sub Type SSD | ||
Memory Size 64GB | ||
Internal/External Internal | ||
Industrial Grade Yes | ||
Form Factor M.2 | ||
NAND Type 3D | ||
Interface Type SATA III 6 Gb/S | ||
Maximum Operating Temperature 85°C | ||
Minimum Operating Temperature -40°C | ||
Height 3.58mm | ||
Length 42mm | ||
Width 22mm | ||
Standards/Approvals UKCA | ||
Transcend SSD, 64GB Memory size, M.2 Form Factor - TS64GMTS560TI-VS1
This SSD is a Compact internal storage device designed for embedded and industrial applications, providing solid-state performance in constrained installations. It connects via a SATA III 6 Gb/s Interface and is intended for use where robust temperature endurance and a small form factor are required in automation, electronics and mechanical control systems.
Features and Benefits:
• 3D NAND flash provides higher density and endurance for sustained writes
• Rated for operation up to 85°C allowing use in hot environments
• Functional down to -40°C for low-temperature deployments
• Industrial-grade construction supports demanding operational cycles
• M.2 2242 form factor enables space-saving integration in tight enclosures
• Rated for operation up to 85°C allowing use in hot environments
• Functional down to -40°C for low-temperature deployments
• Industrial-grade construction supports demanding operational cycles
• M.2 2242 form factor enables space-saving integration in tight enclosures
Applications
• Suitable for data logging in industrial automation controllers
• Ideal for embedded computing in electrical control panels
• Used with Compact single-board computers in robotics
• Can be used for firmware storage in mechanical motion controllers
• Ideal for embedded computing in electrical control panels
• Used with Compact single-board computers in robotics
• Can be used for firmware storage in mechanical motion controllers
Which Interface should I plan for on my host board?
Fit a SATA III-compatible M.2 slot wired for 6 Gb/s signalling to ensure full link speed and correct protocol operation.
How does the device suit continuous-operation systems?
The device is specified as industrial grade, meaning it is designed for extended duty cycles and sustained operation typical of control and monitoring systems.
What physical connector and board profile does it require?
It is supplied in the M.2 2242 board profile, using the standard M.2 edge connector for SATA signalling and requiring a 42mm length mounting position.
Are there certification marks relevant for UK deployment?
It carries UKCA marking, indicating it meets the applicable product assessment requirements for the UK market.