Assemtech Hall Effect Sensor, Wire Open Collector Output, 4.5 → 24 V dc
- N° de stock RS:
- 866-2621
- Référence fabricant:
- PGN-SP-003
- Fabricant:
- Assemtech
Sous-total (1 unité)*
7,86 €
(TVA exclue)
9,51 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 39 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 7,86 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 866-2621
- Référence fabricant:
- PGN-SP-003
- Fabricant:
- Assemtech
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Assemtech | |
| Output Type | Wire Open Collector | |
| Supply Voltage | 4.5 → 24 V dc | |
| Length | 17.27mm | |
| Width | 21.72mm | |
| IP Rating | IPX5 | |
| Sélectionner tout | ||
|---|---|---|
Marque Assemtech | ||
Output Type Wire Open Collector | ||
Supply Voltage 4.5 → 24 V dc | ||
Length 17.27mm | ||
Width 21.72mm | ||
IP Rating IPX5 | ||
- Pays d'origine :
- GB
Digital Hall Effect Proximity Sensors
Digital hall effect proximity sensors in low-profile flange-mount housing. They are suitable for different applications such as door positioning sensing, flow sensing and pedal switches.
Reverse battery protection
Latches in presence of south pole magnet
Unlatches in presence of north pole magnet
Meets IEC529 IPX5 for water protection
Capable of many different operations
Latches in presence of south pole magnet
Unlatches in presence of north pole magnet
Meets IEC529 IPX5 for water protection
Capable of many different operations
Liens connexes
- Assemtech Hall Effect Sensor 4.5 → 24 V dc 24V
- Infineon Through Hole Hall Effect Sensor 24 V
- Assemtech Inductive Block Proximity Sensor, 4.5 → 24 V dc
- RS PRO Hall Effect Sensor 7.5 → 24 V dc
- Assemtech Magnet for Use with Hall Effect Switch
- Honeywell Flange Mount Hall Effect Sensor 4 → 24 V, Barrel Body
- Honeywell Hall Effect Sensor 4.5 → 10.5 V dc
- Infineon Through Hole Hall Effect Sensor 32 V
