Infineon Hall Effect Sensor, 20 V
- N° de stock RS:
- 253-9862
- Référence fabricant:
- TLE4999C4S0001HALA1
- Fabricant:
- Infineon
Sous-total (1 bobine de 2000 unités)*
3 628,00 €
(TVA exclue)
4 390,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 28 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2000 + | 1,814 € | 3 628,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 253-9862
- Référence fabricant:
- TLE4999C4S0001HALA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Supply Voltage | 20 V | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Supply Voltage 20 V | ||
The Infineon TLE series is a Dual channel linear Hall sensor with a bus-capable digital Short-PWM-code interface. Both channels are integrated on one die in the chip. The sensor is developed in compliance to ISO 26262. Highest accuracy over a wide temperature range and lifetime is achieved by an integrated digital temperature- and stress-compensation.
Two highly accurate redundant hall measurement channels integrated on one chip
Operating automotive temperature range -40°C to 150°C
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Main and sub channel programmable independently in EEPROM
Multipoint calibration up to 9 points
2 x 16 bit user-configurable ID in EEPROM
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Multipoint calibration up to 9 points
Operating automotive temperature range -40°C to 150°C
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Main and sub channel programmable independently in EEPROM
Multipoint calibration up to 9 points
2 x 16 bit user-configurable ID in EEPROM
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Multipoint calibration up to 9 points
Liens connexes
- Infineon Hall Effect Sensor, 20 V
- Infineon Hall Effect Sensor, 2.2 V
- Infineon SMD Hall Effect Sensor
- Infineon SMD/SMT Hall Effect Sensor 4.5-5.5 V
- Infineon Through Hole Hall Effect Sensor 32 V
- Infineon Through Hole Hall Effect Sensor 24 V
- Infineon SMD Hall Effect Sensor Latch
- Infineon SMD Hall Effect Sensor Switch
