Variohm Group Hall Effect Sensor Bolt Mount, Analogue Output, Circular Body, 5 V dc 5V
- N° de stock RS:
- 315-225
- Numéro d'article Distrelec:
- 304-26-364
- Référence fabricant:
- Euro-CMRK-A-111-1216-180-17-50
- Fabricant:
- Variohm Group
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 315-225
- Numéro d'article Distrelec:
- 304-26-364
- Référence fabricant:
- Euro-CMRK-A-111-1216-180-17-50
- Fabricant:
- Variohm Group
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Variohm Group | |
| Output Type | Analogue | |
| Product Type | Hall Effect Sensor | |
| Body Style | Circular | |
| Mount Type | Bolt Mount | |
| Maximum DC Voltage | 5V dc | |
| Switching Frequency | 1000Hz | |
| Maximum Supply Voltage | 5V | |
| Minimum Operating Temperature | -40°C | |
| Series | Euro-CMRK | |
| Depth | 6.6mm | |
| Length | 516.5mm | |
| Width | 21.5mm | |
| Standards/Approvals | IEC 60068-2-6 | |
| Maximum Operating Temperature | 125°C | |
| IP Rating | IP68 | |
| Housing Material | High Grade Anodised Aluminium | |
| Sélectionner tout | ||
|---|---|---|
Marque Variohm Group | ||
Output Type Analogue | ||
Product Type Hall Effect Sensor | ||
Body Style Circular | ||
Mount Type Bolt Mount | ||
Maximum DC Voltage 5V dc | ||
Switching Frequency 1000Hz | ||
Maximum Supply Voltage 5V | ||
Minimum Operating Temperature -40°C | ||
Series Euro-CMRK | ||
Depth 6.6mm | ||
Length 516.5mm | ||
Width 21.5mm | ||
Standards/Approvals IEC 60068-2-6 | ||
Maximum Operating Temperature 125°C | ||
IP Rating IP68 | ||
Housing Material High Grade Anodised Aluminium | ||
- Pays d'origine :
- GB
The Variohm Group Angle Sensor is specifically aimed applications where miniaturisation is a key factor. The main sensor housing is manufactured from high grade aluminium alloy with an anodised finish and may be customised to exactly suit the application. The housing and magnet accessory dimensions are fully customisable dependant on customers requirements. With redundant output this compact and fully non-contacting Hall Effect sensor features IP68 sealing and will suit arduous high-duty cycle position feedback applications.
Puck and magnet design
Hall Effect non contacting technology
Long life
Programmable angles from 30 degree up to 360 degree
Liens connexes
- Variohm Group Hall Effect Sensor Bolt Mount Circular Body, 5 V dc 5V
- Variohm Group Hall Effect Sensor Bolt Mount Circular Body, 5 V dc 5.5V
- Variohm Group Hall Effect Sensor Bolt Mount 5 V dc 5.5V
- Variohm Group Hall Effect Sensor Bolt Mount 5 V dc 5V
- Variohm Group Hall Effect Sensor Screw 5 V dc 5.5V
- Variohm Group Hall Effect Sensor Screw 5 V dc 5V
- Variohm Group Hall Effect Sensor Panel Circular Body, 5 V dc 5V
- Variohm Group Hall Effect Sensor Panel Circular Body, 5 V dc 5.5V
