Fluke Red, Black Grabber Clip, 5 mm Tip, 1 kV, 1A, 114 mm Socket
- N° de stock RS:
- 201-2799
- Référence fabricant:
- AC283A
- Fabricant:
- Fluke
Sous-total (1 unité)*
65,65 €
(TVA exclue)
79,44 €
(TVA incluse)
Ajouter 2 unités pour bénéficier d'une livraison gratuite
Stock limité
- 15 restante(s), prêt à être expédié
- Plus 12 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 65,65 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 201-2799
- Référence fabricant:
- AC283A
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Product Type | Grabber Clip | |
| Colour | Red, Black | |
| Current | 1A | |
| Voltage | 1 kV | |
| Contact Material | Nickel Plated | |
| Tip Size | 5 mm | |
| Probe Socket Size | 114mm | |
| Insulation Material | Rubber | |
| Standards/Approvals | CAT IV 600 V, Safety Rating: CAT IV 600 V, 1000 V, CAT III 600 V, 1 A, 5 A, CAT III 1000 V, 10 A, 3 A | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Product Type Grabber Clip | ||
Colour Red, Black | ||
Current 1A | ||
Voltage 1 kV | ||
Contact Material Nickel Plated | ||
Tip Size 5 mm | ||
Probe Socket Size 114mm | ||
Insulation Material Rubber | ||
Standards/Approvals CAT IV 600 V, Safety Rating: CAT IV 600 V, 1000 V, CAT III 600 V, 1 A, 5 A, CAT III 1000 V, 10 A, 3 A | ||
- Pays d'origine :
- TW
FLUKE Grabber Clips, For Use with TL222 and TL224 Test Leads, 1A Current Rating - SureGrip Series - AC283A
Clamp down on your electrical system with these grabber clips from FLUKE. They're designed to make a secure connection to modular test leads so you'll typically find them used with circuit board components such as diodes. An ergonomic handle keeps you steady and the moulded rubber surface prevents slippage. Thanks to a pincer-style design, you can grab onto wires with ease. As the pincers are nickel-plated, they're resistant to impact and corrosion, so you can be confident they'll be with you for the long run.
Features & Benefits
• Rubber finish resists wear and tear for enhanced durability
• Insulated to prevent electric shocks and boost safety
• Pincers open up 5mm, for precision when handling small components
• Black and red colours are easily identifiable
Applications
• Electronic systems
• Automotive industry
• Medical devices
• R&D laboratories
How flexible are these grabber clips?
With an 11.4cm flexible insulated shaft, the clips are bendy enough for use in hard-to-reach areas.
What current rating do the grabbers have?
A 1A current rating means you can safely use the clips in low-current applications.
Liens connexes
- Mueller Electric Blue Grabber Clip with Pincers 1kV
- Staubli Red Grabber Clip with Pincers 1kV, 4mm Socket
- Staubli Red Grabber Clip with Pincers 300V, 2mm Socket
- Hirschmann Test & Measurement Red Grabber Clip with Pincers 1kV, 4mm Socket
- Electro PJP Red Grabber Clip with Pincers 1kV, 4mm Socket
- Staubli Black Grabber Clip with Pincers 1kV, 4mm Socket
- Staubli Black Grabber Clip with Pincers 300V, 2mm Socket
- Electro PJP Black Grabber Clip with Pincers 1kV, 4mm Socket