- N° de stock RS:
- 820-3317
- Référence fabricant:
- 1CPSA1
- Fabricant:
- Honeywell
Produit discontinué
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
- N° de stock RS:
- 820-3317
- Référence fabricant:
- 1CPSA1
- Fabricant:
- Honeywell
Législations et de normes
- Pays d'origine :
- US
Détails du produit
Honeywell 1CPS Cable Pull Safety Switches
The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 meters. This means they are more cost effective than using a comparable multiple emergency stop push button system.
The internal mechanism is latched by both a push and pull action. This provides extra protection should the cable become slackened or broken over time. A midpoint cable tension window indicates the correct cable tension making it easy to set up. Once the contacts have been switched they must be reset by resetting the cable to the correct tension level and manually rotating the rest knob.
For extra protection a set of auxiliary contacts are switched when the main contact open allowing for monitoring or signalling equipment to be activated such as a flashing beacon. The auxiliary contacts are electrically isolated form the direct acting switch contacts meaning a closed circuit can be maintained even when the main contacts are in the open position.
The internal mechanism is latched by both a push and pull action. This provides extra protection should the cable become slackened or broken over time. A midpoint cable tension window indicates the correct cable tension making it easy to set up. Once the contacts have been switched they must be reset by resetting the cable to the correct tension level and manually rotating the rest knob.
For extra protection a set of auxiliary contacts are switched when the main contact open allowing for monitoring or signalling equipment to be activated such as a flashing beacon. The auxiliary contacts are electrically isolated form the direct acting switch contacts meaning a closed circuit can be maintained even when the main contacts are in the open position.
Direct opening actions of normally closed contacts
Choice of 1NC/1NO, 2NC/2NO or 3NC/1NO, 4NC contact configurations
Typical 76 meter cable span
Single red high intensity LED status indicator light available (24 Vdc or 120 Vdc)
Die cast zinc housing
Both gold plated or silver plated contacts available
Optional hardware packs available
UL, CE, CSA, SIL 3 capable
Choice of 1NC/1NO, 2NC/2NO or 3NC/1NO, 4NC contact configurations
Typical 76 meter cable span
Single red high intensity LED status indicator light available (24 Vdc or 120 Vdc)
Die cast zinc housing
Both gold plated or silver plated contacts available
Optional hardware packs available
UL, CE, CSA, SIL 3 capable
Spécifications
Attribut | Valeur |
---|---|
Normal State Configuration | NO/NC |
Cable Length | 76m |
Mounting Orientation | Straight |
IP Rating | IP67 |
Series | 1CPS |
Length | 172.72mm |
Width | 99.06mm |
Depth | 62.2mm |
Housing Material | Die Cast Zinc |
Maximum Operating Temperature | +80°C |
Dimensions | 172.72 x 99.06 x 62.2mm |
Conduit Entry | 1/2 in NPT |
Maximum AC Voltage | 600V |
Minimum Operating Temperature | -25°C |
Maximum Current | 10A |
Maximum DC Voltage | 250V |
- N° de stock RS:
- 820-3317
- Référence fabricant:
- 1CPSA1
- Fabricant:
- Honeywell