Hammond 1591 Series Black Black Lid ABS Enclosure, IP54, 44 mm x 110.1 mm x 82.2 mm
- N° de stock RS:
- 818-0463
- Numéro d'article Distrelec:
- 300-94-089
- Référence fabricant:
- 1591SSBK
- Fabricant:
- Hammond
Sous-total (1 unité)*
7,43 €
(TVA exclue)
8,99 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 38 unité(s) expédiée(s) à partir du 14 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 7,43 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 818-0463
- Numéro d'article Distrelec:
- 300-94-089
- Référence fabricant:
- 1591SSBK
- Fabricant:
- Hammond
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hammond | |
| Body Material | ABS | |
| Product Type | Enclosure | |
| External Height | 44mm | |
| External Length | 110.1mm | |
| External Width | 82.2mm | |
| IP Rating | IP54 | |
| Lid Colour | Black | |
| Colour | Black | |
| Flanged | No | |
| Hazardous Area Certification | No | |
| Shielding | Unshielded | |
| Internal Mount Type | Vertical | |
| Series | 1591 | |
| Standards/Approvals | RoHS | |
| Weight | 91g | |
| Transparent Door | No | |
| Explosion Proof | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Hammond | ||
Body Material ABS | ||
Product Type Enclosure | ||
External Height 44mm | ||
External Length 110.1mm | ||
External Width 82.2mm | ||
IP Rating IP54 | ||
Lid Colour Black | ||
Colour Black | ||
Flanged No | ||
Hazardous Area Certification No | ||
Shielding Unshielded | ||
Internal Mount Type Vertical | ||
Series 1591 | ||
Standards/Approvals RoHS | ||
Weight 91g | ||
Transparent Door No | ||
Explosion Proof No | ||
- Pays d'origine :
- CA
Hammond Enclosure, 110 (L) x 82 (W) x 44mm (H), Unshielded, Black - 1591 Series - 1591SSBK
When you need secure storage for your PCB, pop it into this sturdy enclosure from Hammond. The unit's two-piece lap-joint construction ensures a tight seal against environmental contaminants, protecting delicate contents. As it has an IP54 rating, you can be sure it safeguards against damage caused by splashing water and dust accumulation. The enclosure comes with a matching lid and a set of four self-tapping screws to lock everything in place. The screws are colour-matched to give you a neat finish. As they're pre-threaded into integral holes, installation is a snap.
Features & Benefits
• 1.5mm PCBs slide smoothly into place thanks to a pair of internal card guides
• Durable ABS plastic construction stands up to wear and is suitable for use in tough conditions
• Light weight of 91g puts minimal strain on your setup
• Smooth internal sides ensure fast and easy connector installation
• Lid screws off quickly, so the unit's suitable for applications where repeated opening and closing are necessary
Applications
• Computing networks
• Data systems
• Electronics manufacturing
What size are the lid screws?
The enclosure's lid comes with four M3x10mm Phillips screws inserted into plastic tapped holes.
Liens connexes
- Hammond Flanged 1591 Series Black Black Lid ABS Enclosure 40 mm x 110.1 mm x 82.2 mm
- Hammond 1591 Series Black Black Lid Flame Retardant ABS Enclosure 40 mm x 110 mm x 82 mm
- Hammond 1591R Series Black Black Lid ABS Plastic General Purpose Enclosure 44 mm x 110 mm x 82 mm
- Hammond 1591 Series Black Black Lid ABS Enclosure 25 mm x 165 mm x 71 mm
- Hammond 1591 Series Black Black Lid ABS Enclosure 35 mm x 85 mm x 56 mm
- Hammond 1591 Series Black Black Lid ABS Enclosure 57 mm x 191 mm x 110 mm
- Hammond 1591 Series Black Black Lid ABS Enclosure 25 mm x 100 mm x 50 mm
- Hammond 1591 Series Black Black Lid ABS Enclosure 27 mm x 112 mm x 62 mm