Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure, IP54, 53 mm x 125 mm x 125 mm
- N° de stock RS:
- 528-7202
- Référence fabricant:
- 1590KKBK
- Fabricant:
- Hammond
Sous-total (1 unité)*
28,45 €
(TVA exclue)
34,42 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
- Plus 11 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 28,45 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 528-7202
- Référence fabricant:
- 1590KKBK
- Fabricant:
- Hammond
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hammond | |
| Product Type | Enclosure | |
| Body Material | Die Cast Aluminium | |
| External Height | 53mm | |
| External Length | 125mm | |
| External Width | 125mm | |
| IP Rating | IP54 | |
| Lid Colour | Black | |
| Colour | Black | |
| Flanged | No | |
| Hazardous Area Certification | No | |
| Shielding | Yes | |
| Series | 1590 | |
| Number of Knockouts | 0 | |
| Weight | 426g | |
| Standards/Approvals | RoHS Compliant | |
| Explosion Proof | No | |
| Gasket Material | Silicone Gasket | |
| Sélectionner tout | ||
|---|---|---|
Marque Hammond | ||
Product Type Enclosure | ||
Body Material Die Cast Aluminium | ||
External Height 53mm | ||
External Length 125mm | ||
External Width 125mm | ||
IP Rating IP54 | ||
Lid Colour Black | ||
Colour Black | ||
Flanged No | ||
Hazardous Area Certification No | ||
Shielding Yes | ||
Series 1590 | ||
Number of Knockouts 0 | ||
Weight 426g | ||
Standards/Approvals RoHS Compliant | ||
Explosion Proof No | ||
Gasket Material Silicone Gasket | ||
Statut RoHS : Exempté
Hammond 1590 Diecast Aluminium Enclosure
The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design and in a variety of colours.
Features and Benefits:
• Rugged, diecast aluminium alloy, tough yet easy to machine
• Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding
• Tough polyester powder paint finish allows for easy adhesion of labels and/or silk screens
• Paint colours are matched to standard RAL colors
• Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes
• Low side wall draft angle (2° or less) for easy PC board mounting
FAQ:
What does IP rating means?
The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures.
What is supplied?
• An enclosure with a lid;• Color matched screws
Note
Dimensions do not include the lid.
Liens connexes
- Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure 125 mm, 125 mm
- Hammond Flanged 1590 Series Black Black Lid Die Cast Aluminium Enclosure 53 mm, 39 mm
- Hammond Flanged 1590 Series Black Black Lid Die Cast Aluminium Enclosure 53 mm, 38 mm
- Hammond Flanged 1590 Series Black Black Lid Die Cast Aluminium Enclosure 125 mm, 125 mm
- Hammond Flanged 1590 Series Black Black Lid Die Cast Aluminium Enclosure 125 mm, 125 mm
- Hammond 1590 Series Black Natural Lid Die Cast Aluminium Enclosure 125 mm, 125 mm
- Hammond Flanged 1590 Series Natural Black Lid Die Cast Aluminium Enclosure 125 mm, 125 mm
- Hammond 1590 Series Natural Natural Lid Die Cast Aluminium Enclosure 125 mm, 125 mm