Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure, IP54, 27 mm x 92.5 mm x 38.5 mm
- N° de stock RS:
- 528-7088
- Numéro d'article Distrelec:
- 300-81-837
- Référence fabricant:
- 1590ABK
- Fabricant:
- Hammond
Sous-total (1 unité)*
11,52 €
(TVA exclue)
13,94 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 29 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 11,52 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 528-7088
- Numéro d'article Distrelec:
- 300-81-837
- Référence fabricant:
- 1590ABK
- Fabricant:
- Hammond
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hammond | |
| Product Type | Enclosure | |
| Body Material | Die Cast Aluminium | |
| External Height | 27mm | |
| External Length | 92.5mm | |
| External Width | 38.5mm | |
| IP Rating | IP54 | |
| Colour | Black | |
| Lid Colour | Black | |
| Flanged | No | |
| Shielding | Shielded | |
| Hazardous Area Certification | No | |
| Series | 1590 | |
| Number of Knockouts | 0 | |
| Weight | 82g | |
| Standards/Approvals | RoHS | |
| Transparent Door | No | |
| Explosion Proof | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Hammond | ||
Product Type Enclosure | ||
Body Material Die Cast Aluminium | ||
External Height 27mm | ||
External Length 92.5mm | ||
External Width 38.5mm | ||
IP Rating IP54 | ||
Colour Black | ||
Lid Colour Black | ||
Flanged No | ||
Shielding Shielded | ||
Hazardous Area Certification No | ||
Series 1590 | ||
Number of Knockouts 0 | ||
Weight 82g | ||
Standards/Approvals RoHS | ||
Transparent Door No | ||
Explosion Proof No | ||
Statut RoHS : Exempté
Hammond Enclosure, 93 (L) x 39 (W) x 31mm (H), Die-Cast Aluminium Construction, Shielded - 1590 Series - 1590ABK
To keep your electrical devices out of harm's way, slot them into this enclosure from Hammond. It's made from sturdy die-cast aluminium, so you can trust it to withstand impact, abrasion and corrosion, as well as the high temperatures commonly experienced in industrial settings. Lap-joint construction leaves no room for gapping between the lid and body, so contaminants can't seep through and disrupt the performance of sensitive equipment. The IP54-rated assembly's an ideal choice for harsh industrial settings, as it offers reliable protection against dust and low-pressure water sprays from any direction.
Features & Benefits
• Weighs in at 82g to minimise load on the mounting surface
• Textured black polyester powder paint provides a long-lasting and professional-looking finish
• Comes with four screws and pre-drilled corner holes to cut down on installation time
• Low side wall draft angle of 2° or less makes for easy PC board mounting
Applications
• Industrial automation
• Electronic control units
• Industrial IT and network security
Does this product protect against EMI?
Yes. This is a shielded assembly that prevents EMI or RFI from affecting the performance of your electronic components.
Liens connexes
- Hammond Flanged 1590 Series Natural Natural Lid Die Cast Aluminium Enclosure 27 mm x 92.5 mm x 38.5 mm
- Hammond Flanged 1590 Series Natural Natural Lid Die Cast Aluminium Enclosure 31 mm x 92.6 mm x 38.5 mm
- Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure 61 mm x 192 mm x 112 mm
- Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure 38 mm x 92 mm x 92 mm
- Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure 31 mm x 112 mm x 60 mm
- Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure 27 mm x 50.5 mm x 50.5 mm
- Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure 56 mm x 119 mm x 94 mm
- Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure 53 mm x 125 mm x 125 mm