Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure, IP54, 38 mm x 92 mm x 92 mm
- N° de stock RS:
- 528-7072
- Référence fabricant:
- 1590YBK
- Fabricant:
- Hammond
Sous-total (1 unité)*
18,17 €
(TVA exclue)
21,99 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 27 unité(s) prête(s) à être expédiée(s)
- Plus 29 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 18,17 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 528-7072
- Référence fabricant:
- 1590YBK
- Fabricant:
- Hammond
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hammond | |
| Product Type | Enclosure | |
| Body Material | Die Cast Aluminium | |
| External Height | 38mm | |
| External Length | 92mm | |
| External Width | 92mm | |
| IP Rating | IP54 | |
| Colour | Black | |
| Lid Colour | Black | |
| Flanged | No | |
| Hazardous Area Certification | No | |
| Shielding | Yes | |
| Series | 1590 | |
| Number of Knockouts | 0 | |
| Standards/Approvals | RoHS | |
| Weight | 250g | |
| Transparent Door | No | |
| Explosion Proof | No | |
| Gasket Material | Silicone | |
| Sélectionner tout | ||
|---|---|---|
Marque Hammond | ||
Product Type Enclosure | ||
Body Material Die Cast Aluminium | ||
External Height 38mm | ||
External Length 92mm | ||
External Width 92mm | ||
IP Rating IP54 | ||
Colour Black | ||
Lid Colour Black | ||
Flanged No | ||
Hazardous Area Certification No | ||
Shielding Yes | ||
Series 1590 | ||
Number of Knockouts 0 | ||
Standards/Approvals RoHS | ||
Weight 250g | ||
Transparent Door No | ||
Explosion Proof No | ||
Gasket Material Silicone | ||
Statut RoHS : Exempté
Hammond Enclosure, 92 (L) x 92 (W) x 38mm (H), Shielded, IP54 Rating - 1590 Series - 1590YBK
Got sensitive electronic equipment that needs to remain at ground level? Protect your device or circuit board from work boots with this enclosure from Hammond. The small cabinet or stomp box is made from robust diecast aluminium alloy, so it's built to handle the scuffs and tramples of an industrial workplace. For protection against radio frequency interference, the lap joint construction of the box means it's shielded. This helps to minimise the chance of crosstalk with nearby devices. If you want your enclosure to stand out in a crowd, it's easy to attach an identification label. Thanks to its powder paint finish, your marker is sure to stick.
Features & Benefits
• Low side wall draft angle offers simple PCB mounting
• IP54-rated box that's protected against dust and water splashes from any direction
• Smooth surface makes it easy to wipe clean
Applications
• Sound eqipment
• Electronics manufacturing
• Automotive industry
• Laboratories
Does this enclosure come with lid screws?
Yes, for convenience the box is supplied with lid fixing screws, so it's ready to use straight away. The screws are black to match the colour of the unit for an aesthetically appealing finish.
Liens connexes
- Hammond Flanged 1590 Series Black Black Lid Die Cast Aluminium Enclosure 42 mm x 92 mm x 92 mm
- Hammond 1590 Series Clear Natural Lid Die Cast Aluminium Enclosure 42 mm x 92 mm x 92 mm
- Hammond Flanged 1590 Series Natural Natural Lid Die Cast Aluminium Enclosure 42 mm x 92 mm x 92 mm
- Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure 42 mm x 92 mm x 92 mm
- Hammond Flanged 1590 Series Black Black Lid Die Cast Aluminium Enclosure 44 mm x 92 mm x 92 mm
- Hammond 1590 Series Black Natural Lid Die Cast Aluminium Enclosure 42 mm x 92 mm x 92 mm
- Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure 61 mm x 192 mm x 112 mm
- Hammond 1590 Series Black Black Lid Die Cast Aluminium Enclosure 31 mm x 112 mm x 60 mm