Hammond 1554 Series Grey, Clear ABS Enclosure, IP66, 61 mm x 88.9 mm x 88.9 mm
- N° de stock RS:
- 230-6465
- Numéro d'article Distrelec:
- 300-33-987
- Référence fabricant:
- 1554EGY
- Fabricant:
- Hammond
Sous-total (1 unité)*
14,00 €
(TVA exclue)
16,94 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 14,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 230-6465
- Numéro d'article Distrelec:
- 300-33-987
- Référence fabricant:
- 1554EGY
- Fabricant:
- Hammond
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hammond | |
| Body Material | ABS | |
| Product Type | Enclosure | |
| External Height | 61mm | |
| External Width | 88.9mm | |
| External Length | 88.9mm | |
| IP Rating | IP66 | |
| Colour | Grey, Clear | |
| Hazardous Area Certification | UL | |
| Internal Mount Type | Integral Inserts, DIN Rail | |
| Series | 1554 | |
| Standards/Approvals | UL Listed, 6P, 12 & 13, 4X, NEMA Type 4 | |
| Transparent Door | Yes | |
| Gasket Material | Silicone | |
| Sélectionner tout | ||
|---|---|---|
Marque Hammond | ||
Body Material ABS | ||
Product Type Enclosure | ||
External Height 61mm | ||
External Width 88.9mm | ||
External Length 88.9mm | ||
IP Rating IP66 | ||
Colour Grey, Clear | ||
Hazardous Area Certification UL | ||
Internal Mount Type Integral Inserts, DIN Rail | ||
Series 1554 | ||
Standards/Approvals UL Listed, 6P, 12 & 13, 4X, NEMA Type 4 | ||
Transparent Door Yes | ||
Gasket Material Silicone | ||
- Pays d'origine :
- CA
The Hammond 1554 series watertight ABS enclosure, Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details). ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details)
ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB.For indoor use
Enclosure colour is a light grey (RAL 7035)
Casketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water
Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed)
Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68.(Except 1554/55 V size which is 4,4X only)
ABS Plastic versions are designed to meet IP67
Liens connexes
- Hammond 1554 Series Grey ABS Enclosure 88.9 mm, 88.9 mm
- Hammond 1554 Series Light Grey Polycarbonate Enclosure 88.9 mm, 88.9 mm
- Hammond 1554 Series Light Grey Clear Lid Polycarbonate Enclosure 88.9 mm, 88.9 mm
- Hammond 1554 Series Clear IP68 61 mm 66 mm
- Hammond 1554 Series Grey IP68 61 mm 88.9 mm
- Hammond 1554 Series Clear IP66 80 mm 88.9 mm
- Hammond 1554 Series Light Grey Polycarbonate Enclosure 160 mm, 88.9 mm
- Hammond 1554 Series Light Grey Polycarbonate Enclosure 119.4 mm, 88.9 mm