Hammond 1550Z Series Unpainted, Black Black Lid Aluminium General Purpose Enclosure, IP66, IK08, 37 mm x 91 mm x 36 mm
- N° de stock RS:
- 228-7725
- Référence fabricant:
- 1550Z102BK
- Fabricant:
- Hammond
Sous-total (1 unité)*
15,26 €
(TVA exclue)
18,46 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 16 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 15,26 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 228-7725
- Référence fabricant:
- 1550Z102BK
- Fabricant:
- Hammond
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hammond | |
| Body Material | Aluminium | |
| Product Type | General Purpose Enclosure | |
| External Height | 37mm | |
| External Length | 91mm | |
| External Width | 36mm | |
| Ventilated | No | |
| IP Rating | IP66 | |
| Colour | Unpainted, Black | |
| Lid Colour | Black | |
| Flanged | No | |
| Hazardous Area Certification | cUL, UL | |
| Shielding | Shielded | |
| Internal Mount Type | Wall | |
| Series | 1550Z | |
| Standards/Approvals | cUL & UL Listed, NEMA 4X standards | |
| IK Rating | IK08 | |
| Gasket Material | Silicone Rubber | |
| Explosion Proof | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Hammond | ||
Body Material Aluminium | ||
Product Type General Purpose Enclosure | ||
External Height 37mm | ||
External Length 91mm | ||
External Width 36mm | ||
Ventilated No | ||
IP Rating IP66 | ||
Colour Unpainted, Black | ||
Lid Colour Black | ||
Flanged No | ||
Hazardous Area Certification cUL, UL | ||
Shielding Shielded | ||
Internal Mount Type Wall | ||
Series 1550Z | ||
Standards/Approvals cUL & UL Listed, NEMA 4X standards | ||
IK Rating IK08 | ||
Gasket Material Silicone Rubber | ||
Explosion Proof No | ||
- Pays d'origine :
- TW
The Hammond 1550Z Series watertight diecast aluminium enclosure has thick wall.
Very economical - thick wall - diecast aluminium - watertight electronic instrument enclosure.
Rugged, diecast aluminium alloy (tough - yet easy to machine),
Two piece “tongue & groove” construction for protection against access of dust and water.
Ideal for repetitive opening and closing.
Easy to wall mount using “through box - blind hole” construction (on all sizes except: 1550Z102, 1550Z115 & 1550Z120). Access to blind holes is outside of gasket ring for superior protection (see photo features below).
Unpainted version is vibra finished for a smooth surface with no sharp edges.
Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside & out)
Liens connexes
- Hammond 1550Z Series Unpainted IP66 91 mm, 36 mm
- Hammond 1550Z Series Unpainted IP66 223 mm, 51 mm
- Hammond 1550Z Series Unpainted IP66 121 mm, 82 mm
- Hammond 1550Z Series Unpainted IP66 160 mm, 82 mm
- Hammond 1550Z Series Black IP66 223 mm, 51 mm
- Hammond 1550Z Series Black IP66 151 mm, 27 mm
- Hammond 1550Z Series Unpainted IP66 171 mm, 122 mm
- Hammond 1550Z Series Black IP66 50 mm, 45 mm