McLennan Servo Supplies Planetary Gearbox, 25:1 Gear Ratio, 24 Nm Maximum Torque

Voir l’ensemble des Gearboxes

Sous-total (1 unité)*

267,62 €

(TVA exclue)

323,82 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 2 unité(s) expédiée(s) à partir du 28 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +267,62 €

*Prix donné à titre indicatif

N° de stock RS:
363-6337
Référence fabricant:
IP57-M2-25
Fabricant:
McLennan Servo Supplies
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

McLennan Servo Supplies

Gear Ratio

25:1

Gearbox Type

Planetary

Maximum Output Torque

24 Nm

Shaft Diameter

12.69mm

Diameter

57 mm

Overall Length

66mm

Planetary Gearheads Series 57


Industrial type of gearhead for fixing to a wide range of motors
Planetary construction for high torque and compact dimensions
NEMA size 23 frame size
Reduced backlash
Supplied with two pinions
Fixing kits required for attachment to motors
Ideal for industrial, process or scientific applications which require high dynamics, accurate velocity or positional control

Fixing Kits


These kits are used to attach the Series 57 industrial planetary gearheads to a range of motors.
The kit consists of a fitting clamp, adaptor and fitting screws.

Note

De-rate ratio 10:1 (stock no. 363-6315) by 10%.


0.9° and 1.8° Hybrid Stepper Motors


1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:


Robotics
Paper feed mechanisms
Teletype printers
Small machine tools
Computer peripherals
X-Y plotters

Liens connexes