Semikron Danfoss Skyper 42 R MOSFET Gate Driver 2, 30 A 15.6 V
- N° de stock RS:
- 905-6175
- Référence fabricant:
- Skyper 42 R
- Fabricant:
- Semikron Danfoss
Offre groupée disponible
Sous-total (1 unité)*
178,24 €
(TVA exclue)
215,67 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 15 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 1 | 178,24 € |
| 2 - 4 | 170,93 € |
| 5 - 9 | 166,47 € |
| 10 - 19 | 159,88 € |
| 20 + | 155,96 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 905-6175
- Référence fabricant:
- Skyper 42 R
- Fabricant:
- Semikron Danfoss
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Semikron Danfoss | |
| Product Type | MOSFET | |
| Output Current | 30A | |
| Fall Time | 1.1μs | |
| Driver Type | MOSFET | |
| Number of Outputs | 2 | |
| Rise Time | 1.1μs | |
| Minimum Supply Voltage | 15.6V | |
| Number of Drivers | 2 | |
| Maximum Supply Voltage | 15.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 69mm | |
| Standards/Approvals | No | |
| Height | 19mm | |
| Width | 80 mm | |
| Mount Type | Through Hole | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Semikron Danfoss | ||
Product Type MOSFET | ||
Output Current 30A | ||
Fall Time 1.1μs | ||
Driver Type MOSFET | ||
Number of Outputs 2 | ||
Rise Time 1.1μs | ||
Minimum Supply Voltage 15.6V | ||
Number of Drivers 2 | ||
Maximum Supply Voltage 15.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 69mm | ||
Standards/Approvals No | ||
Height 19mm | ||
Width 80 mm | ||
Mount Type Through Hole | ||
Automotive Standard No | ||
- Pays d'origine :
- DE
SKYPER® IGBT Driver Core Module
The SKYPER 42 R IGBT driver core constitutes an interface between IGBT modules and the controller. This core is a half-bridge driver with the basic functions built-in for driving, potential separation and protection. The SKYPER 42 R was developed for systems in the power range of 1 to 8 MVA.
When using Semikron IGBT driver cores an adapter board (RS 905-6059) is required between the IGBT module and the gate driver core.
Two output channels
Up to 50μC (micro Coulomb) gate charge
Integrated potential-free power supply
Short Pulse Suppression (SPS)
Under Voltage Protection (UVP)
Drive interlock (dead time) top / bottom (DT)
Dynamic Short Circuit Protection (DSCP) by VCE monitoring and direct switch-off
Shut Down Input (SDI)
Failure Management
Expandable by External Boost Capacitors (BC)
DC bus voltage up to 1200V
SKYPER 42 R can be plugged or soldered on the SKYPER® IGBT adaptor board
MOSFET & IGBT Drivers, Semikron
Liens connexes
- Semikron Danfoss Board 1 SKYPER 32 R MOSFET Gate Driver 2, 15 A 15.6 V
- Semikron Danfoss SKYPER 32 R MOSFET Gate Driver 2, 15 A 40-Pin 15.6 V
- Semikron Danfoss SKYPER IGBT Gate Driver
- Semikron Danfoss Board 1 SKYPER 32PRO R MOSFET Gate Driver 2, 15 A 20-Pin 15.6 V
- Semikron Danfoss SKHI 22B H4 R MOSFET Gate Driver 2, 8 A 15.6 V
- Semikron Danfoss SKHI 22A H4 R MOSFET Gate Driver 2, 8 A 15.6 V
- Semikron SKYPER 32 PRO R MOSFET Gate Driver 2 15.6V
- Semikron Danfoss SKYPER 12 press-fit C 600A Gate Driver 2, 15 A 20-Pin 15 V