Infineon MOSFET Gate Driver 4, 1.5 A 36-Pin 5.5 V, DSO
- N° de stock RS:
- 233-4398
- Référence fabricant:
- TLE92464EDXUMA1
- Fabricant:
- Infineon
Sous-total (1 bobine de 1000 unités)*
4 944,00 €
(TVA exclue)
5 982,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 29 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 1000 + | 4,944 € | 4 944,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 233-4398
- Référence fabricant:
- TLE92464EDXUMA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | Solenoid Driver | |
| Output Current | 1.5A | |
| Pin Count | 36 | |
| Package Type | DSO | |
| Number of Outputs | 4 | |
| Driver Type | MOSFET | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Number of Drivers | 4 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Width | 7.6 mm | |
| Length | 10.3mm | |
| Height | 2.5mm | |
| Standards/Approvals | No | |
| Mount Type | Surface | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type Solenoid Driver | ||
Output Current 1.5A | ||
Pin Count 36 | ||
Package Type DSO | ||
Number of Outputs 4 | ||
Driver Type MOSFET | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Number of Drivers 4 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Width 7.6 mm | ||
Length 10.3mm | ||
Height 2.5mm | ||
Standards/Approvals No | ||
Mount Type Surface | ||
Automotive Standard AEC-Q100 | ||
The Infineon TLE92464ED is a flexible, monolithic solenoid driver IC designed for the control of linear solenoids in automatic transmissions, electronic stability control and active suspension applications. The device includes the drive transistor and the current sensing resistor to minimize the number of external components. The device control the load current with less than 1% error. It target current from 0 to 1500mA can be programmed with a resolution of 15 bit. The device supports dither currents up to 1800mA. The dither generator superimposes a triangular or trapezoidal waveform with programmable amplitude, frequency and shape on the programmed current set point. A 32 bit SPI interface is used to control the 4 channels and monitor the status of the diagnostic functions. The SPI communication is secured with an 8 bit CRC and a programmable timeout watchdog.
Two independent current feedback paths
Integrated system clock with clock watchdog
Temperature range -40°C to 175 °C
Excellent immunity to large load supply voltage changes
Liens connexes
- Infineon TLE92464EDXUMA1 4 4.5 → 5.5V 36-Pin, PG-DSO-36-72
- Infineon TLE92466EDXUMA1 PG-DSO-36-72
- Infineon 1EDI3021ASXUMA1 Gate Driver 5.5V 20-Pin, PG-DSO
- Infineon 1EDI3023ASXUMA1 Gate Driver 5.5V 20-Pin, PG-DSO
- Infineon 1EDI3030ASXUMA1 Gate Driver 5.5V 20-Pin, PG-DSO
- Infineon 1EDI3031ASXUMA1 Gate Driver 5.5V 20-Pin, PG-DSO
- Infineon 1EDI3033ASXUMA1 Gate Driver 5.5V 20-Pin, PG-DSO
- Infineon 1EDI3020ASXUMA1 Gate Driver 5.5V 20-Pin, PG-DSO
