STMicroelectronics MOSFET Gate Driver 1, 30 A 6-Pin 36V, HPAK
- N° de stock RS:
- 190-6869P
- Référence fabricant:
- VN5T016AHTR-E
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Consulter les options de prix de grosSous-total 50 unités (conditionné en bande continue)*
141,80 €
(TVA exclue)
171,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 120 unité(s) expédiée(s) à partir du 27 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 50 - 120 | 2,836 € |
| 125 + | 2,762 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 190-6869P
- Référence fabricant:
- VN5T016AHTR-E
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | General Purpose Driver | |
| Output Current | 30A | |
| Pin Count | 6 | |
| Package Type | HPAK | |
| Fall Time | 53μs | |
| Driver Type | MOSFET | |
| Rise Time | 55μs | |
| Minimum Supply Voltage | 36V | |
| Maximum Supply Voltage | 36V | |
| Number of Drivers | 1 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 2.4mm | |
| Standards/Approvals | No | |
| Length | 6.6mm | |
| Mount Type | Surface | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type General Purpose Driver | ||
Output Current 30A | ||
Pin Count 6 | ||
Package Type HPAK | ||
Fall Time 53μs | ||
Driver Type MOSFET | ||
Rise Time 55μs | ||
Minimum Supply Voltage 36V | ||
Maximum Supply Voltage 36V | ||
Number of Drivers 1 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 2.4mm | ||
Standards/Approvals No | ||
Length 6.6mm | ||
Mount Type Surface | ||
Automotive Standard AEC-Q100 | ||
- Pays d'origine :
- CN
The STMicroelectronics VN5T016AH-E is a device made using VI Power technology, intended for driving resistive or inductive loads with one side connected to ground. The active VCCpin voltage clamp protects the device against low energy spikes. This device integrates an analog current sense which delivers a current proportional to the load current. Fault conditions such as overload, over temperature or short to VCC are reported via the current sense pin. Its output current limitation protects the device in overload condition.
Very low electromagnetic susceptibility
Thermal shutdown indication
Self limiting of fast thermal transients
Very low stand-by current
Liens connexes
- Coral G950-06809-01 for use with Raspberry Pi
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series Transistor Output 2
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- SICK Encoder Collets for Use with DBS36E-BBxxxx
- Littelfuse Through Hole Gas Discharge Tube
- Igus GFM-0607-08 6mm Bore Plain Bearing, 7mm O.D
- Raspberry Pi QWERTY (Spain) Raspberry Pi Keyboard
- Coral Google Mini PCIe M.2 Accelerator B/M Development Kit G650-04686-01
