STMicroelectronics MOSFET Gate Driver 1, 30 A 6-Pin 36 V, HPAK
- N° de stock RS:
- 190-4933
- Référence fabricant:
- VN5T016AHTR-E
- Fabricant:
- STMicroelectronics
Sous-total (1 bobine de 2500 unités)*
6 122,50 €
(TVA exclue)
7 407,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 16 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2500 + | 2,449 € | 6 122,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 190-4933
- Référence fabricant:
- VN5T016AHTR-E
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | General Purpose Driver | |
| Output Current | 30A | |
| Pin Count | 6 | |
| Fall Time | 53μs | |
| Package Type | HPAK | |
| Driver Type | MOSFET | |
| Number of Outputs | 5 | |
| Rise Time | 55μs | |
| Minimum Supply Voltage | 36V | |
| Number of Drivers | 1 | |
| Maximum Supply Voltage | 36V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 2.4mm | |
| Width | 6.2 mm | |
| Standards/Approvals | No | |
| Length | 6.6mm | |
| Mount Type | Surface | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type General Purpose Driver | ||
Output Current 30A | ||
Pin Count 6 | ||
Fall Time 53μs | ||
Package Type HPAK | ||
Driver Type MOSFET | ||
Number of Outputs 5 | ||
Rise Time 55μs | ||
Minimum Supply Voltage 36V | ||
Number of Drivers 1 | ||
Maximum Supply Voltage 36V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 2.4mm | ||
Width 6.2 mm | ||
Standards/Approvals No | ||
Length 6.6mm | ||
Mount Type Surface | ||
Automotive Standard AEC-Q100 | ||
The STMicroelectronics VN5T016AH-E is a device made using VI Power technology, intended for driving resistive or inductive loads with one side connected to ground. The active VCCpin voltage clamp protects the device against low energy spikes. This device integrates an analog current sense which delivers a current proportional to the load current. Fault conditions such as overload, over temperature or short to VCC are reported via the current sense pin. Its output current limitation protects the device in overload condition.
Very low electromagnetic susceptibility
Thermal shutdown indication
Self limiting of fast thermal transients
Very low stand-by current
Liens connexes
- STMicroelectronics VN5T016AHTR-E MOSFET Gate Driver 8 to 36V 7-Pin, HPAK
- STMicroelectronics VN5E010AHTR-E MOSFET Gate Driver 1 28V 6-Pin, HPAK
- STMicroelectronics VN5E010AHTR-E MOSFET Gate Driver 4.5 to 28V 7-Pin, HPAK
- STMicroelectronics VND5050AK-E MOSFET Gate Driver 2 PowerSSO
- STMicroelectronics VN800PSTR-E MOSFET Gate Driver 1 36V 8-Pin, SOIC
- STMicroelectronics VN751PT MOSFET Gate Driver 1 36V 5-Pin, PPAK
- STMicroelectronics VNB14NV04TR-E MOSFET Gate Driver 40V 3-Pin, D2PAK
- STMicroelectronics VNL5050N3TR-E MOSFET Gate Driver 1 SOT-223
