Microchip MOSFET Gate Driver 1, 9 A 8-Pin 18 V, SOIC

Voir l’ensemble des Gate Drivers
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
N° de stock RS:
187-9413
Référence fabricant:
MCP14A0902-E/SN
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Product Type

MOSFET

Output Current

9A

Pin Count

8

Fall Time

32ns

Package Type

SOIC

Number of Outputs

1

Driver Type

MOSFET

Rise Time

32ns

Minimum Supply Voltage

4.5V

Maximum Supply Voltage

18V

Number of Drivers

1

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Series

MCP14A0902

Length

4.9mm

Height

1.25mm

Standards/Approvals

ESD: 2kV (HBM), 200V (MM)

Width

3.9 mm

Mount Type

Surface

Automotive Standard

No

The MCP14A0901/2 devices are high-speed MOSFET drivers that are capable of providing up to 9.0A of peak current while operating from a single 4.5V to 18V supply. There are two output configurations available, inverting (MCP14A0901) and noninverting (MCP14A0902). These devices feature low shoot-through current, fast rise and fall times, and matched propagation delays which make them ideal for high switching frequency applications.

The MCP14A0901/2 family of devices offers enhanced control with Enable functionality. The active-high Enable pin can be driven low to drive the output of the MCP14A0901/2 low, regardless of the status of the Input pin. An integrated pull-up resistor allows the user to leave the Enable pin floating for standard operation.

These devices are highly latch-up resistant under any condition within their power and voltage ratings. They can accept up to 500 mA of reverse current being forced back into their outputs without damage or logic upset. All terminals are fully protected against electrostatic discharge (ESD) up to 2 kV (HBM) and 200V (MM).

Liens connexes