Microchip ATSAMD21E17D-MU MOSFET Gate Driver 32-Pin 3.63 V, QFN

Voir l’ensemble des Gate Drivers

Sous-total (1 paquet de 5 unités)*

12,60 €

(TVA exclue)

15,25 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Dernier stock RS
  • 490 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité
Prix par unité
le paquet*
5 +2,52 €12,60 €

*Prix donné à titre indicatif

N° de stock RS:
176-5510
Référence fabricant:
ATSAMD21E17D-MU
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Product Type

Low Power

Pin Count

32

Fall Time

15ns

Package Type

QFN

Driver Type

MOSFET

Rise Time

15ns

Minimum Supply Voltage

1.62V

Maximum Supply Voltage

3.63V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Series

SAM D21

Standards/Approvals

AEC-Q100

Mount Type

Surface

Automotive Standard

AEC-Q100 Grade 1, AEC-Q100 Grade 2

The Microchip ATSAMD21E17 low-power microcontroller with 32-bit ARM Cortex processor has 128KB Flash and 16KB of SRAM. It operates on voltage range of 1.62V to 3.63V. This microcontroller is designed for simple and intuitive migration with identical peripheral modules, hex compatible code, identical linear address map, and pin compatible migration paths. It features In-system programmable Flash, 12-channel Direct Memory Access Controller (DMAC), 12-channel Event System, programmable Interrupt Controller, up to 52 programmable I/O pins, 32-bit Real-Time Clock and Calendar (RTC), up to five 16-bit Timer/Counters (TC) and up to four 24-bit Timer/Counters for Control (TCC), where each TC can be configured to perform frequency and waveform generation, accurate program execution timing or input capture with time and frequency measurement of digital signals.

External Interrupt Controller (EIC)

Two-pin Serial Wire Debug (SWD) programming, test and debugging interface

Idle and Standby Sleep modes

Sleepwalking peripherals

Up to four compare channels with optional complementary output

Generation of synchronized pulse width modulation (PWM) pattern across port pins

Deterministic fault protection, fast decay and configurable dead-time between complementary output

Dithering that increase resolution with up to 5 bit and reduce quantization error

Up to eight PWM channels on each 24-bit TCC

Up to two PWM channels on each 16-bit TCC

Up to two PWM channels on each 16-bit TC

32-bit Real Time Counter (RTC) with clock/calendar function

One full-speed (12 Mbps) Universal Serial Bus (USB) 2.0 interface

Up to four Analog Comparators (AC) with Window Compare function

Temperature range between -40°C and 125°C

QFN package

Liens connexes