Wickmann 16A Panel Mount Fuse Holder for 6.3 x 32 mm, 250V
- N° de stock RS:
- 360-7238
- Référence fabricant:
- 80000000005
- Fabricant:
- Wickmann
Sous-total (1 paquet de 5 unités)*
11,52 €
(TVA exclue)
13,94 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Dernier stock RS
- 115 restante(s), prêt à être expédié
- Plus 170 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 + | 2,304 € | 11,52 € |
*Prix donné à titre indicatif
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
L'unité (en paquet de 5)
12,21 €
(TVA exclue)
14,77 €
(TVA incluse)
- N° de stock RS:
- 360-7238
- Référence fabricant:
- 80000000005
- Fabricant:
- Wickmann
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Wickmann | |
| Product Type | Panel Mount Fuse Holder | |
| Voltage | 250V | |
| Body Material | Thermoplastic Polyamide 66 | |
| IP Rating | IP40 | |
| Compatible Fuse Size | 6.3 x 32 mm | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | IEC 60127-6, CSA C22.2. No.39, UL 512 | |
| Protection Category | PC2 | |
| Terminal Type | Solder | |
| Contact Material | Copper Alloy | |
| Series | 800 | |
| Cap Style | Bayonet Joint | |
| Sélectionner tout | ||
|---|---|---|
Marque Wickmann | ||
Product Type Panel Mount Fuse Holder | ||
Voltage 250V | ||
Body Material Thermoplastic Polyamide 66 | ||
IP Rating IP40 | ||
Compatible Fuse Size 6.3 x 32 mm | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals IEC 60127-6, CSA C22.2. No.39, UL 512 | ||
Protection Category PC2 | ||
Terminal Type Solder | ||
Contact Material Copper Alloy | ||
Series 800 | ||
Cap Style Bayonet Joint | ||
'WICKMANN' Shocksafe, Panel mount
One complete fuse holder body system requires one holder body and one cap of the appropriate size.,Maximum current 10A @ 250V (6·3x32mm), 6·3A @ 250V (5x20mm)
Protection to PC2
Polyamide Body, depth behind panel 42mm
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Approvals
VDE, SEMKO, UL, CSA
Liens connexes
- Littelfuse 16A Panel Mount Fuse Holder for 6.3 x 32 mm, 250
- Littelfuse 16A Panel Mount Fuse Holder for 6.3 x 32 mm, 250V
- Schurter 16A Panel Mount Fuse Holder 250V ac
- Bulgin 16A Panel Mount Fuse Holder 250V ac
- Littelfuse 16A PCB Mount Fuse Holder for 6.3 x 32mm Fuse, 250V ac
- Schurter 16A Panel Mount Fuse Holder 250V ac
- Eaton 10A Panel Mount Fuse Holder for 6.3 x 32 mm, 250V ac
- Wurth Elektronik 6.3A Fuse Holder for 6.3 x 32 mm, 250V