RS PRO 10 A In-line Fuse Holder for 5 x 20 mm, 250 V
- N° de stock RS:
- 237-5259
- Numéro d'article Distrelec:
- 304-19-065
- Fabricant:
- RS PRO
Sous-total (1 unité)*
2,65 €
(TVA exclue)
3,21 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 297 unité(s) prête(s) à être expédiée(s)
- Plus 1 705 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 1 500 unité(s) expédiée(s) à partir du 21 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2,65 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 237-5259
- Numéro d'article Distrelec:
- 304-19-065
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | In-line Fuse Holder | |
| Current Rating | 10 A | |
| Voltage | 250 V | |
| Body Material | Nylon, Brass | |
| Minimum Operating Temperature | -40°C | |
| Compatible Fuse Size | 5 x 20 mm | |
| Compatible Fuse Type | Tube | |
| Maximum Operating Temperature | 80°C | |
| Standards/Approvals | RoHS | |
| Series | 2375259 | |
| Contact Material | Brass | |
| Lead Wire Length | 280mm | |
| Lead Wire Size | 18AWG | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type In-line Fuse Holder | ||
Current Rating 10 A | ||
Voltage 250 V | ||
Body Material Nylon, Brass | ||
Minimum Operating Temperature -40°C | ||
Compatible Fuse Size 5 x 20 mm | ||
Compatible Fuse Type Tube | ||
Maximum Operating Temperature 80°C | ||
Standards/Approvals RoHS | ||
Series 2375259 | ||
Contact Material Brass | ||
Lead Wire Length 280mm | ||
Lead Wire Size 18AWG | ||
- Pays d'origine :
- CN
RS PRO 10A Inline Fuse Holder
RS PRO is proud to introduce a high-quality Inline fuse holder. This fuse holder work in conjunction with a 10A fuse cartridge and together is designed to be a sacrificial component in electrical and electronic applications. The primary purpose of a fuse is to ultimately isolate circuitry or components from being damaged or destroyed in the event of an electrical surge.
Upon inspection the fuse holder has a 142 mm 1015 18 AWG wire leads on either side, nylon housing that interlocks and encapsulates a 5A fuse keeping it secure and protected from splashes and debris. The RS PRO fuse holder is versatile and commonly found in automotive, audio & video applications.
Features and Benefits
Specifications
The RS Pro fuse holder has current rating 10A at 250V and it is compatible fuses 5X 20mm tube fuse. It has ambient temperature is -40℃ to +80℃. The wire is 1015 18AWG red , nominal OD is 2.8mm.
RS PRO Inline Fuse Holder Variant – Available Separately
Material black nylon and brass
Applicable 5X20MM tube fuse
Applications
Note
Warning: If use above 32V, Power must be turn off when changing the fuse.
Liens connexes
- RS PRO 5 A In-line Fuse Holder for 5 x 20 mm, 250 V
- Schurter 6.3 A In-line Fuse Holder for 5 x 20 mm, 250 V ac
- Schurter 12 A In-line Fuse Holder for 5 x 20 mm, 250 V ac
- Bulgin 10 A In-line Fuse Holder, 250 V
- Schurter In-line Fuse Holder for 5 x 20 mm
- Littelfuse 10 A In-line Fuse Holder for 5 x 20 mm, 25 V
- Bulgin 10 A In-line Fuse Holder, 250 V ac
- Eaton 20 A In-line Fuse Holder for 5 x 20 mm, 25 V