Schurter 10A Panel Mount Fuse Holder, 1P-Pole for 6.3 x 32 mm, 500V ac
- N° de stock RS:
- 227-0985
- Référence fabricant:
- 0031.1631
- Fabricant:
- Schurter
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 227-0985
- Référence fabricant:
- 0031.1631
- Fabricant:
- Schurter
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Schurter | |
| Product Type | Panel Mount Fuse Holder | |
| Number of Poles | 1 | |
| Body Material | Black, Thermoset | |
| IP Rating | IP40 | |
| Minimum Operating Temperature | -40°C | |
| Compatible Fuse Size | 6.3 x 32 mm | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | VDE Certified, cULus Listed, RoHS, CSA 22.2 no. 4248-1, UL 4248-1, IEC 60127-6 | |
| Series | FEC | |
| Contact Material | Tin Plated Copper | |
| Protection Category | PC2 | |
| Cap Style | Slotted Cap, Finger Grip | |
| Terminal Type | Solder | |
| Sélectionner tout | ||
|---|---|---|
Marque Schurter | ||
Product Type Panel Mount Fuse Holder | ||
Number of Poles 1 | ||
Body Material Black, Thermoset | ||
IP Rating IP40 | ||
Minimum Operating Temperature -40°C | ||
Compatible Fuse Size 6.3 x 32 mm | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals VDE Certified, cULus Listed, RoHS, CSA 22.2 no. 4248-1, UL 4248-1, IEC 60127-6 | ||
Series FEC | ||
Contact Material Tin Plated Copper | ||
Protection Category PC2 | ||
Cap Style Slotted Cap, Finger Grip | ||
Terminal Type Solder | ||
- Pays d'origine :
- CH
Schurter FEC Series
Schurter FEC series panel mount fuse holders for 5 x 20 or 6.3 x 32 mm cartridge fuses. The FEC series have quick connect terminals and area available with a finger grip or slotted cap.
For appliances in unattended use
Low profile fuse holder with insulation walls
Panel Mount
IP40 Rated
Quick connect terminals
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Note
An accessory is required to complete the assembly 866-3413 Slotted Cap 6.3x20mm Fuse Size or 123-8467 Slotted Cap 5x20mm Fuse Size
Liens connexes
- Schurter 10A Panel Mount Fuse Holder 500V ac
- Schurter 10A PCB Mount Fuse Holder 500V ac
- Schurter 10A Fuse Holder 250V ac
- Schurter 10A Fuse Holder Accessory 250V ac
- Schurter 16A Panel Mount Fuse Holder 500V ac
- Schurter 10A Panel Mount Fuse Holder 250V ac
- Schurter 10A Fuse Holder, 1P-Pole
- Schurter 10A Fuse Cover 250V ac