Eaton 20 A In-line Fuse Holder for 6.3 x 32 mm, 600 V
- N° de stock RS:
- 225-8210
- Référence fabricant:
- BK-HVI-HH-R
- Fabricant:
- Eaton
Sous-total (1 sachet de 20 unités)*
520,56 €
(TVA exclue)
629,88 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 10 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Sachet(s) | Le Sachet | Prix par unité* |
|---|---|---|
| 1 + | 520,56 € | 26,028 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 225-8210
- Référence fabricant:
- BK-HVI-HH-R
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Product Type | In-line Fuse Holder | |
| Body Material | Phenolic | |
| IP Rating | IP54 | |
| Compatible Fuse Size | 6.3 x 32 mm | |
| Compatible Fuse Type | In-Line Water Resistant | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Terminal Type | Quick Connect | |
| Contact Material | Copper | |
| Lead Wire Size | 12AWG | |
| Series | Bussmann | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Product Type In-line Fuse Holder | ||
Body Material Phenolic | ||
IP Rating IP54 | ||
Compatible Fuse Size 6.3 x 32 mm | ||
Compatible Fuse Type In-Line Water Resistant | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Terminal Type Quick Connect | ||
Contact Material Copper | ||
Lead Wire Size 12AWG | ||
Series Bussmann | ||
- Pays d'origine :
- PH
Eaton In-line Fuse Holder, 20A Current Rating, 600V Voltage - BK-HVI-HH-R
This in-line fuse holder provides a sealed carrier for 6.3x32mm cartridge fuses used in electrical and electronic assemblies. It houses a water-resistant fuse Interface and is intended for in-line protection of circuits where a compact, connectable fuse solution is required. The design accommodates standard mating terminals and insulated lead connections suited to industrial and automotive environments.
Features and Benefits:
• Phenolic body reduces heat transfer for higher operating temperatures • Copper contacts ensure low-resistance current flow • Rated for 20 A to protect moderate-current circuits • 600V capability supports high-voltage system applications • IP54 ingress protection permits use in damp conditions • Quick-connect terminals speed installation and maintenance
Applications
• Suitable for protecting wiring looms in automotive systems • Ideal for in-line protection in factory automation panels • Used with control cabinets in electrical distribution setups • Can be used for servicing mobile plant electrical circuits • Used for field repairs where water resistance is needed
What conductor size is recommended for connection to this component?
Use 12 AWG cable on the leads to match the Terminal provision and current rating.
How does the construction cope with elevated temperatures?
The materials selected permit continuous operation up to 150°C without loss of electrical continuity.
What Terminal type is provided for external connections?
The unit is fitted with quick-connect terminals to accept standard spade fittings for Rapid attachment.
How does the unit address moisture exposure when installed outdoors?
The housing meets IP54, providing protection against limited dust ingress and splashing water in exposed locations.
Note
Eaton formerly known as Bussmann
Liens connexes
- Eaton 20 A In-line Fuse Holder for 6.3 x 32 mm, 600 V
- Eaton 2A T Glass Cartridge Fuse, 6.3 x 32 mm
- Eaton 15A Panel Mount Fuse Holder for 6.3 x 32 mm, 480V
- Eaton 30A Panel Mount Fuse Holder for 6.3 x 32 mm, 480V
- Schurter 6.3 A In-line Fuse Holder for 6.3 x 32 mm, 32 V dc
- Schurter 6.3 A In-line Fuse Holder for 6.3 x 32 mm 32 V ac
- Schurter 6.3 A In-line Fuse Holder for 6.3 x 32 mm 32 V dc
- Eaton 20A Inline Fuse Holder for 6.3 x 32mm Fuse, 250V ac