Schurter 16A Panel Mount Fuse Holder for 5 x 20mm Fuse, 250V ac

Voir l’ensemble des Fuse Holders

Sous-total (1 boîte de 100 unités)*

303,60 €

(TVA exclue)

367,40 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 200 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
La Boite*
100 +3,036 €303,60 €

*Prix donné à titre indicatif

N° de stock RS:
173-9897
Référence fabricant:
3101.0120
Fabricant:
Schurter
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Schurter

Fuse Size

5 x 20mm

Current Rating

16A

Voltage Rating

250V ac

Protection Category

PC2

International Protection Rating

IP67

Contact Material

Tin Plated Copper Alloy

Cap Style

Slotted

Series

FPG2

Schurter 5x20mm Fuseholders – FPG Series


Schurter FPG series fuseholders are a robust and dependable solution to a range of fuse requirements. Available with either a slotted or fingergrip plug, the Schurter FPG fuseholder series offers increased versatility of choice. Applications include industrial electronics, household appliances and medical equipment.

Terminals: 4.8x0.5mm for quick connector or soldering - depending on model
Protection: PC2
Sealed from the rear
Thermoplastic body
Tin-plated brass contacts

Approvals

UL & CSA (16A/250V), VDE & SEMKO (10/250V)
The Schurter fuse holder is used to integrate fuses safely in electrical circuits, ensure a robust current path and provide a method to replace fuses once they manage overcurrent events as intended. Fuse holders come in a range of styles each designed to suit a specific style of a fuse. Fuse holders can be categorized by their attachment or mounting type.

Compact design
Solder terminal
Mounting from rear side
Thermoplastic material
Degree of protection IP67 available


Panel Mounting


CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.

Liens connexes