Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Aim-TTi
	Model Number	TG1010A
	Digital Frequency	Yes
	Maximum Frequency Range Sinewave	10MHz
	Minimum Frequency Range Sinewave	0.1MHz
	Maximum Frequency Range Square Pulse and Arbitrary Waveform	10MHz
	Minimum Frequency Range Square Pulse and Arbitrary Waveform	0.1 MHz
	Minimum Frequency Range Triangle/Saw	0.1MHz
	Maximum Frequency Range Triangle/Saw	10MHz
	Digital Amplitude and Offset	Yes
	Internal Linear and Log Sweep	Yes
	Variable Sweep	Yes
	Internal and External Amplitude Modulation	Yes
	FM Modulation	Yes
	Time Base Accuracy	±10ppm
	Height	130mm
	Minimum Operating Temperature	+5°C
	Dimensions	330 x 212 x 130mm
	Interface Type	GPIB, RS232
	Output Impedance	50 Ω, 600 Ω
	Width	212mm
	Weight	4.1kg
	Input Impedance	6 kΩ
	Maximum Operating Temperature	+40°C
	Frequency Range Square Pulse and Arbitrary Waveform	0.1 mHz → 10 MHz
	Length	330mm
	Output Amplitude	20V Pk-Pk

	Sélectionner tout
	Marque Aim-TTi
	Model Number TG1010A
	Digital Frequency Yes
	Maximum Frequency Range Sinewave 10MHz
	Minimum Frequency Range Sinewave 0.1MHz
	Maximum Frequency Range Square Pulse and Arbitrary Waveform 10MHz
	Minimum Frequency Range Square Pulse and Arbitrary Waveform 0.1 MHz
	Minimum Frequency Range Triangle/Saw 0.1MHz
	Maximum Frequency Range Triangle/Saw 10MHz
	Digital Amplitude and Offset Yes
	Internal Linear and Log Sweep Yes
	Variable Sweep Yes
	Internal and External Amplitude Modulation Yes
	FM Modulation Yes
	Time Base Accuracy ±10ppm
	Height 130mm
	Minimum Operating Temperature +5°C
	Dimensions 330 x 212 x 130mm
	Interface Type GPIB, RS232
	Output Impedance 50 Ω, 600 Ω
	Width 212mm
	Weight 4.1kg
	Input Impedance 6 kΩ
	Maximum Operating Temperature +40°C
	Frequency Range Square Pulse and Arbitrary Waveform 0.1 mHz → 10 MHz
	Length 330mm
	Output Amplitude 20V Pk-Pk

Statut RoHS non applicable

TTi TG1010A 10MHz DDS Function/Arbitrary Generator

10MHz DDS Function Generator with limited arbitrary waveform capability
Accuracy and stability of a crystal oscillator
Waveforms include sine, square, positive pulse, negative pulse, multi-level square wave, triangle, ramp-up, ramp-down, ARB and d.c.
Low phase noise and distortion
Modulation modes include trigger/burst, gated, sweep, AM and FSK
Provides trigger/burst, variable start stop phase, gating, phase continuous sweep, amplitude modulation, output inversion and phase locking of 2 or more generators
Very wide frequency sweeps are possible
Fast phase continuous frequency switching
Housed in half-rack 3U size metal case

Supplied with

mains lead and full instructions.

Aim-TTi TG1010A Function Generator, 0.1MHz Min, 10MHz Max, FM Modulation, Variable Sweep

Produit de remplacement

TTi TG1010A 10MHz DDS Function/Arbitrary Generator

Supplied with

Liens connexes