Altera FPGA Cyclone IV 6272 Cells, 270000 bit 392 Blocks, 144-Pin EQFP
- N° de stock RS:
- 729-3757P
- Référence fabricant:
- EP4CE6E22C8N
- Fabricant:
- Altera
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 729-3757P
- Référence fabricant:
- EP4CE6E22C8N
- Fabricant:
- Altera
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Altera | |
| Series | Cyclone IV | |
| Product Type | FPGA | |
| Number of Logic Cells | 6272 | |
| Number of Logic Units | 392 | |
| Number of Multipliers | 15 | |
| Mount Type | Surface | |
| Package Type | EQFP | |
| Minimum Supply Voltage | 1.15V | |
| Pin Count | 144 | |
| Maximum Supply Voltage | 1.25V | |
| Number of RAM Bits | 270000bit | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.6mm | |
| Length | 20mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Altera | ||
Series Cyclone IV | ||
Product Type FPGA | ||
Number of Logic Cells 6272 | ||
Number of Logic Units 392 | ||
Number of Multipliers 15 | ||
Mount Type Surface | ||
Package Type EQFP | ||
Minimum Supply Voltage 1.15V | ||
Pin Count 144 | ||
Maximum Supply Voltage 1.25V | ||
Number of RAM Bits 270000bit | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 85°C | ||
Height 1.6mm | ||
Length 20mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
Cyclone FPGA, Altera
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.