Cynergy3 FSP10 Series In-line Flow Switch for Liquid, 3L/min Min, 80L/min Max
- N° de stock RS:
- 780-0273
- Référence fabricant:
- FSP10A30
- Fabricant:
- Cynergy3
Sous-total (1 unité)*
153,96 €
(TVA exclue)
186,29 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s)
- Plus 9 unité(s) expédiée(s) à partir du 12 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 153,96 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 780-0273
- Référence fabricant:
- FSP10A30
- Fabricant:
- Cynergy3
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Cynergy3 | |
| Product Type | Flow Switch | |
| Media Monitored | Liquid | |
| Device Type | In-line | |
| Minimum Flow Rate | 3L/min | |
| Housing Material | Polyamide, Brass | |
| Maximum Flow Rate | 80L/min | |
| Connection Type | 1 in BSP | |
| Maximum Pressure | 8bar | |
| Minimum Media Temperature | -30°C | |
| IP Rating | IP54 | |
| Maximum Supply Voltage | 250V ac | |
| Maximum Media Temperature | 85°C | |
| Minimum Operating Temperature | 85°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | ISO9001 CERTIFIED | |
| Series | FSP10 | |
| Current Rating | 10A | |
| Sélectionner tout | ||
|---|---|---|
Marque Cynergy3 | ||
Product Type Flow Switch | ||
Media Monitored Liquid | ||
Device Type In-line | ||
Minimum Flow Rate 3L/min | ||
Housing Material Polyamide, Brass | ||
Maximum Flow Rate 80L/min | ||
Connection Type 1 in BSP | ||
Maximum Pressure 8bar | ||
Minimum Media Temperature -30°C | ||
IP Rating IP54 | ||
Maximum Supply Voltage 250V ac | ||
Maximum Media Temperature 85°C | ||
Minimum Operating Temperature 85°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals ISO9001 CERTIFIED | ||
Series FSP10 | ||
Current Rating 10A | ||
- Pays d'origine :
- CN
Sensata Cynergy3 In-Line Flow Switch, 10A, 250V AC - FSP10 Series - FSP10A30
This in-line flow switch from Sensata Cynergy3 directly controls an electric pump. It's used in gravity-fed systems to increase the pressure or flow of water. Its brass tube is strong and corrosion-resistant for a durable, long-lasting connection to a pipe. As it automatically starts a pump when the flow rate exceeds 3L/min (litres per minute), there's no need for manual intervention, making it simple to use. When water demand recedes or a tank empties, it turns the pump off. You'll find switches like this one used in irrigation and plumbing systems.
Features & Benefits
• Polyamide (PA) housing that's resistant to wear for an extended service life
• IP54 (ingress protection) rating for protection against dust and water splashes from any direction
• Supplied with electrical terminations for convenient installation
Where should I mount this flow switch?
You should install this in-line flow switch in a pipe directly above the pump. As its operation relies upon water flowing against gravity, you should mount it vertically with the flow direction upward.
How do I know if the switch is working properly?
You can check the function of the switch by using the test button that's located underneath the device.
Liens connexes
- Cynergy3 FSVPLC Series In-line Flow Switch for Liquid 80L/min Max
- Cynergy3 FSVPLC Series In-line Flow Switch for Liquid 80L/min Max
- ifm electronic SM4100 Series Magnetic Inductive Flow Meter Flow Meter for Liquid 3L/min Max
- Cynergy3 UF Series Sensor Flow Meter for Liquid 8L/min Max
- Novotech Controls SPCO Series Control Valve Flow Sensor for Liquid 6L/min Max
- Cynergy3 FSU Series Flow Switch Flow Switch for Liquid 0.47L/min Max
- Cynergy3 FSU Series Flow Switch Flow Switch for Liquid 0.53L/min Max
- Cynergy3 FSU Series Flow Switch Flow Switch for Liquid 0.24L/min Max