Parker S Series Variable Area Flow Meter for Liquid, 1 L/min Min, 25 L/min Max
- N° de stock RS:
- 185-9982
- Référence fabricant:
- S.900001
- Fabricant:
- Parker
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
138,65 €
(TVA exclue)
167,77 €
(TVA incluse)
- N° de stock RS:
- 185-9982
- Référence fabricant:
- S.900001
- Fabricant:
- Parker
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Parker | |
| Media Monitored | Liquid | |
| Device Type | Variable Area | |
| Minimum Flow Rate | 1 L/min | |
| Maximum Flow Rate | 25 L/min | |
| Supply Voltage | 5 V dc | |
| Pipe Diameter Range | 3/8 in | |
| Connection Type | 3/8 BSP | |
| Maximum Pressure | 10bar | |
| Minimum Operating Temperature | +5°C | |
| Maximum Operating Temperature | +50°C | |
| Series | S | |
| Sélectionner tout | ||
|---|---|---|
Marque Parker | ||
Media Monitored Liquid | ||
Device Type Variable Area | ||
Minimum Flow Rate 1 L/min | ||
Maximum Flow Rate 25 L/min | ||
Supply Voltage 5 V dc | ||
Pipe Diameter Range 3/8 in | ||
Connection Type 3/8 BSP | ||
Maximum Pressure 10bar | ||
Minimum Operating Temperature +5°C | ||
Maximum Operating Temperature +50°C | ||
Series S | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
Compact Flow Sensor
This lightweight, compact flow sensor is intended as a low cost option for flow rates of 1 to 20 l/min with low pressure drop. Basic construction consists of a one piece sensor body housing a turbine rotor. Flow through the unit causes rotation of the turbine which interrupts an Infra red photoelectric beam within the unit. Can be used in batch control or totalising etc.
Manufactured from Grilamid TR55 with a PTFE filled nylon rotor on a stainless steel shaft
Accuracy: ±5%
Dimensions (mm): 52 x 29 x 27
Weight: 16g
Accuracy: ±5%
Dimensions (mm): 52 x 29 x 27
Weight: 16g



