Honeywell AWM3000 Series Amplified Airflow Sensor for Dry Gas, 200cm³/min Min, 200cm³/min Max

Voir l’ensemble des Flow Sensors

Sous-total (1 unité)*

227,28 €

(TVA exclue)

275,01 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 77 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +227,28 €

*Prix donné à titre indicatif

N° de stock RS:
407-574
Numéro d'article Distrelec:
303-99-502
Référence fabricant:
AWM3100V
Fabricant:
Honeywell
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Honeywell

Media Monitored

Dry Gas

Product Type

Airflow Sensor

Device Type

Amplified

Minimum Flow Rate

200cm³/min

Housing Material

Plastic

Maximum Flow Rate

200cm³/min

Maximum Pressure

25psi

Minimum Media Temperature

-25°C

Maximum Supply Voltage

15V dc

Maximum Media Temperature

85°C

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

85°C

Series

AWM3000

Standards/Approvals

RoHS Compliant

Current Rating

20mA

Pays d'origine :
CN

Honeywell Amplified Airflow Sensor, 15V DC, -200cm³/min to 200cm³/min - AWM3000 Series - AWM3100V


This airflow sensor from Honeywell is used for accurate air transmission measurements and control. The sensitive component has a wide measurement range between -200cm³/min (standard cubic centimetres per minute) and 200cm³/min, meaning it can detect significant changes in airflow. It's also amplified so it can increase the magnitude of the input signal for a clearer output. Thanks to its robust plastic housing material, this component is built to withstand impact and wear for use in harsh conditions.

Features & Benefits


• Maximum supply voltage of 15V DC for optimal energy efficiency

• Wide operating temperature range of -25°C to +85°C for use in a variety of demanding conditions

• Light weight of 10.8g to minimise strain on your equipment

Applications


• Medical respirators and ventilators

• Low vacuum control

• Gas analysers

• Process control

Can I use this sensor with liquids?


This airflow sensor is specifically designed for use with dry gases and should not be used to monitor liquids.

Can I use this sensor at high pressures?


The sensor can withstand a maximum pressure of 25psi (pounds per square inch), making it a good choice for use in high-pressure applications.

Amplified Airflow Sensor AWM3000 Series


Like the AWM2000 Series, the dual Wheatstone bridges in the AWM3000 series control airflow measurement. The AWM3000 Series is amplified; therefore, it can be used to increase the gain and to introduce voltage offsets to the sensor output. The heater control circuit and the sensing bridge supply circuit are on board the package.

Features and Benefits


• Laser Trimmed for improved sensor interchangeability;• Flow sensing up to 1.0 SLPM;• Low differential pressure sensing

Product Application Information


• Damper control for heating, ventilation, and air conditioning systems;• Gas analysers;• Low vacuum control;• Process control;• Medical respirators and ventilators;• Oxygen concentrators;• Leak detection equipment;• Vent hoods;• Anaesthesia control;• Gas metering;• Gas chromatography

Liens connexes