Sensata / Cynergy3 SSF67 Series Vertical Nitrile Rubber (NBR) Float Switch, 1 m Cable, Direct Load, 240 V ac Max, 120 V
- N° de stock RS:
- 492-8924
- Référence fabricant:
- SSF67A25B125
- Fabricant:
- Sensata / Cynergy3
Sous-total (1 unité)*
263,12 €
(TVA exclue)
318,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 3 unité(s) expédiée(s) à partir du 09 février 2026
- Plus 20 unité(s) expédiée(s) à partir du 16 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 263,12 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 492-8924
- Référence fabricant:
- SSF67A25B125
- Fabricant:
- Sensata / Cynergy3
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Sensata / Cynergy3 | |
| Product Type | Float Switch | |
| Mount Type | Vertical | |
| Switch Output | Direct Load | |
| Housing Material | 316L Stainless Steel | |
| Cable Length | 1m | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 135°C | |
| Maximum AC Voltage | 240V | |
| Maximum DC Voltage | 120V | |
| Maximum Current | 600mA | |
| Maximum Pressure | 10bar | |
| Gasket Material | Nitrile Rubber (NBR) | |
| Standards/Approvals | No | |
| Series | SSF67 | |
| Hazardous Area Certification | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Sensata / Cynergy3 | ||
Product Type Float Switch | ||
Mount Type Vertical | ||
Switch Output Direct Load | ||
Housing Material 316L Stainless Steel | ||
Cable Length 1m | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 135°C | ||
Maximum AC Voltage 240V | ||
Maximum DC Voltage 120V | ||
Maximum Current 600mA | ||
Maximum Pressure 10bar | ||
Gasket Material Nitrile Rubber (NBR) | ||
Standards/Approvals No | ||
Series SSF67 | ||
Hazardous Area Certification No | ||
- Pays d'origine :
- CN
Dual Position Stainless Steel Float Switch
Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications.
Two Independent Switching Points
Lower Float Make on Fall, and Upper Float Make on Rise
Minimum Fluid SG: 0.80
Switch Differential (each level) Nominal: 1mm
Suitable for High and Low Level Alarm and Control Signal
Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications
Vertical Mounting, M16 x 2 Thread
Temperature Range: -20 to +135°C
Nitrile Gasket
’Safe Area’ for Use in Petrochemical, Storage, and Process Control Applications
Note
All ratings in tech. spec. table are for resistive loads only
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Liens connexes
- Sensata Cynergy3 SSF67 Series Vertical Stainless Steel Float Switch 1m Cable
- Sensata Cynergy3 SSF67 Series Vertical Stainless Steel Float Switch Direct Load 120V dc Max
- Sensata Cynergy3 SSF67 Series Vertical Stainless Steel Float Switch Direct Load 120V
- Sensata Cynergy3 SSF67 Series Vertical Stainless Steel Float Switch 1m Cable, NO/NC
- Sensata Cynergy3 Glass Reinforced Nylon Float Switch Direct Load
- Sensata Cynergy3 PE Float Switch 5m Cable, Direct Load
- Sensata Cynergy3 RSF64EXS Series Vertical Polyphenylene Sulfide Float Switch 1.5m Cable 240V ac
- Sensata Cynergy3 SSF28 Series Vertical Stainless Steel Float Switch 350mm Cable 300V ac Max, 300V