Gems Sensors Vertical, Horizontal Float Switch, 1 m Cable, Relay, 220 V ac Max, 200 V dc Max
- N° de stock RS:
- 395-7050
- Référence fabricant:
- 011-1900
- Fabricant:
- Gems Sensors
Sous-total (1 unité)*
120,97 €
(TVA exclue)
146,37 €
(TVA incluse)
Ajouter 1 unité pour bénéficier d'une livraison gratuite
En stock
- 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 9 unité(s) expédiée(s) à partir du 16 février 2026
- Plus 9 unité(s) expédiée(s) à partir du 13 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 120,97 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 395-7050
- Référence fabricant:
- 011-1900
- Fabricant:
- Gems Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Gems Sensors | |
| Product Type | Float Switch | |
| Mount Type | Vertical, Horizontal | |
| Switch Output | Relay | |
| Housing Material | Brass, Nitrile Butadiene Rubber | |
| Cable Length | 1m | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 80°C | |
| Maximum AC Voltage | 220V | |
| Maximum DC Voltage | 200V | |
| Maximum Current | 0.5A | |
| Maximum Pressure | 10bar | |
| Standards/Approvals | CE | |
| Hazardous Area Certification | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Gems Sensors | ||
Product Type Float Switch | ||
Mount Type Vertical, Horizontal | ||
Switch Output Relay | ||
Housing Material Brass, Nitrile Butadiene Rubber | ||
Cable Length 1m | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 80°C | ||
Maximum AC Voltage 220V | ||
Maximum DC Voltage 200V | ||
Maximum Current 0.5A | ||
Maximum Pressure 10bar | ||
Standards/Approvals CE | ||
Hazardous Area Certification No | ||
Statut RoHS : Exempté
- Pays d'origine :
- US


Metal Level Switches – Series 1900
With large float displacement, switch withstands rough service
IP64 rated
Output is SPST normally open
Suitable for high viscosity liquids
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Liens connexes
- Gems Sensors Horizontal Float Relay
- Gems Sensors Horizontal Float Relay
- Gems Sensors Vertical Stainless Steel Float Switch 1m Cable, Relay
- Gems Sensors Horizontal Float, Direct Load
- Gems Sensors LS-77700 Series Horizontal Brass Float Switch 610mm Cable 240V ac Max
- Gems Sensors LS-750 Series Vertical Brass Float Switch 7.62m Cable, SPST NC
- Gems Sensors LS-800-5 Series Vertical Brass Float Switch 610mm Cable, SPST NO
- Gems Sensors LS-7 Series Horizontal Versaplast Float Switch 610mm Cable, SPST NO/NC
