Sensata Cynergy3 RSF70 Series Horizontal External Polypropylene Float Switch, Float, 1m Cable, SPNO, 240V ac Max, 120V

Voir l’ensemble des Float Switches

Sous-total (1 unité)*

24,96 €

(TVA exclue)

30,20 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 91 unité(s) prête(s) à être expédiée(s)
  • Plus 7 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 355 unité(s) expédiée(s) à partir du 31 décembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +24,96 €

*Prix donné à titre indicatif

N° de stock RS:
338-9744
Numéro d'article Distrelec:
135-88-860
Référence fabricant:
RSF74Y100RN
Fabricant:
Sensata / Cynergy3
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Sensata / Cynergy3

Device Type

Float

Mounting Type

Horizontal External

Switch Output

SPNO

Body Material

Polypropylene

Cable Length

1m

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

+100°C

Maximum AC Voltage

240V

Maximum DC Voltage

120V

Maximum Current

600 mA

Gasket Material

Nitrile

Series

RSF70

Standards Met

NSF Approved, WRAS

Pays d'origine :
CN

Cynergy3 Horizontal Float Switches


Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

WRAS approval explained


WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

What materials can you choose from?


• Nylon
• Polypropylene
• Polypropylene Sulfide (PPS)

Features and Benefits


• Operating temperature: -10 °C to +120 °C
• N/O or N/C Switch output
• Switch action may be reversed by rotating the switch through 180º
• Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
• Flying Lead
• M12 plug connection
• Internal & external fitting inside a tank
• UL recognised

Typical Applications


These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Note

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.

Sensata Cynergy3 Horizontal External Float Switch, NO/NC, 600mA - RSF70 Series - RSF74Y100RN


This float switch from Sensata Cynergy3 is a versatile option that can be fitted through a tank wall from the outside. This makes it an ideal solution for situations where you don't have access to the inside of your tank. For flexibility when setting up your tank, the switch has an NO/NC (normally open/normally closed) output, meaning you can set it up to turn the circuit either on or off when activated. Use this device to prevent under or overfilling in vending machines, dishwashers and vehicle auxiliary tanks.

Features and Benefits


• Polypropylene body material is mechanically strong and resistant to moisture and chemicals for use in harsh settings
• Nitrile gasket prevents leakage by providing a secure seal
• Broad operating temperature range of -20°C to +100°C makes it suitable for a wide range of environments
• Cable length of 1m for ease of connection

How do I mount this float switch?


This switch is designed for horizontal mounting from the outside of a tank. You can reverse the movement of the switch by rotating it through 180°, allowing you to choose whether the switch activates when the water in the tank falls above or below a preset level.

Liens connexes