onsemi 1 Flip Flop IC 74HC, CMOS, LSTTL, NMOS, TTL, 14-Pin TSSOP
- N° de stock RS:
- 184-4800P
- Référence fabricant:
- MC74HC74ADTR2G
- Fabricant:
- onsemi
Offre groupée disponible
Consulter les options de prix de grosSous-total 500 unités (conditionné en bobine)*
102,00 €
(TVA exclue)
123,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 200 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 500 - 900 | 0,204 € |
| 1000 + | 0,176 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 184-4800P
- Référence fabricant:
- MC74HC74ADTR2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Flip Flop IC | |
| Logic Family | 74HC | |
| Input Type | Single Ended | |
| Output Type | CMOS, LSTTL, NMOS, TTL | |
| Clock Frequency | 24MHz | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2V | |
| Package Type | TSSOP | |
| Maximum Supply Voltage | 6V | |
| Pin Count | 14 | |
| Maximum Propagation Delay Time @ CL | 26ns | |
| Minimum Operating Temperature | -55°C | |
| Flip-Flop Type | D Flip-Flop | |
| Trigger Type | Positive Edge | |
| Number of Elements per Chip | 1 | |
| Maximum Operating Temperature | 125°C | |
| Height | 1.2mm | |
| Series | MC74HC74ADTR2G | |
| Standards/Approvals | No | |
| Length | 5.1mm | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Flip Flop IC | ||
Logic Family 74HC | ||
Input Type Single Ended | ||
Output Type CMOS, LSTTL, NMOS, TTL | ||
Clock Frequency 24MHz | ||
Mount Type Surface | ||
Minimum Supply Voltage 2V | ||
Package Type TSSOP | ||
Maximum Supply Voltage 6V | ||
Pin Count 14 | ||
Maximum Propagation Delay Time @ CL 26ns | ||
Minimum Operating Temperature -55°C | ||
Flip-Flop Type D Flip-Flop | ||
Trigger Type Positive Edge | ||
Number of Elements per Chip 1 | ||
Maximum Operating Temperature 125°C | ||
Height 1.2mm | ||
Series MC74HC74ADTR2G | ||
Standards/Approvals No | ||
Length 5.1mm | ||
Automotive Standard AEC-Q100 | ||
- Pays d'origine :
- PH
High-Performance Silicon-Gate CMOS, The MC574HC74A is identical in pin out to the LS74. The device inputs are compatible with standard CMOS outputs, with pullup resistors, they are compatible with LSTTL outputs. This device consists of two D flip-flops with individual Set, Reset, and Clock inputs. Information at a D-input is transferred to the corresponding Q output on the next positive going edge of the clock input. Both Q and Qbar outputs are available from each flip-flop. The Set and Reset inputs are asynchronous.
Output Drive Capability: 10 LSTTL Loads
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0 V
Low Input Current: 1.0 mA
High Noise Immunity Characteristic of CMOS Devices
Chip Complexity: 128 FETs or 32 Equivalent Gates