Nexperia 74HC123D,652 2 Flip Flop IC HC, 16-Pin SOIC
- N° de stock RS:
- 103-8170
- Référence fabricant:
- 74HC123D,652
- Fabricant:
- Nexperia
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 103-8170
- Référence fabricant:
- 74HC123D,652
- Fabricant:
- Nexperia
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Nexperia | |
| Product Type | Flip Flop IC | |
| Logic Family | HC | |
| Input Type | Edge Triggered | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Minimum Supply Voltage | 2V | |
| Pin Count | 16 | |
| Maximum Supply Voltage | 6V | |
| Trigger Type | Dual Retriggerable Monostable | |
| Minimum Operating Temperature | -40°C | |
| Maximum Propagation Delay Time @ CL | 65ns | |
| Flip-Flop Type | Monostable Multivibrator | |
| Number of Elements per Chip | 2 | |
| Maximum Operating Temperature | 125°C | |
| Height | 1.45mm | |
| Length | 10mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Nexperia | ||
Product Type Flip Flop IC | ||
Logic Family HC | ||
Input Type Edge Triggered | ||
Mount Type Surface | ||
Package Type SOIC | ||
Minimum Supply Voltage 2V | ||
Pin Count 16 | ||
Maximum Supply Voltage 6V | ||
Trigger Type Dual Retriggerable Monostable | ||
Minimum Operating Temperature -40°C | ||
Maximum Propagation Delay Time @ CL 65ns | ||
Flip-Flop Type Monostable Multivibrator | ||
Number of Elements per Chip 2 | ||
Maximum Operating Temperature 125°C | ||
Height 1.45mm | ||
Length 10mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
- Pays d'origine :
- TH
The 74HC123, 74HCT123 are high-speed Si-gate CMOS devices and are pin compatible with Low-power Schottky TTL (LSTTL). The 74HC123, 74HCT123 are dual retriggerable monostable multivibrators with output pulse width control by three methods: The basic pulse is programmed by selection of an external resistor (REXT) and capacitor (CEXT). Once triggered, the basic output pulse width may be extended by retriggering the gated active LOW-going edge input (nA) or the active HIGH-going edge input (nB). By repeating this process, the output pulse period (nQ = HIGH, nQ = LOW) can be made as long as desired.
Simple control interface
Power on reset
Dual devices with separate reset inputs
Negative or positive edge triggered
CMOS low power
Key applications
Timing delays in control circuits