Infineon NOR 64 MB SPI, QPI, Parallel Flash Memory 8-Pin USON, S25FL064LABNFI041
- N° de stock RS:
- 182-0330
- Référence fabricant:
- S25FL064LABNFI041
- Fabricant:
- Infineon
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 182-0330
- Référence fabricant:
- S25FL064LABNFI041
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | Flash Memory | |
| Memory Size | 64MB | |
| Interface Type | SPI, QPI, Parallel | |
| Package Type | USON | |
| Pin Count | 8 | |
| Organisation | 8M x 8 Bit | |
| Maximum Clock Frequency | 108MHz | |
| Mount Type | Surface | |
| Cell Type | NOR | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 4 mm | |
| Height | 0.55mm | |
| Length | 4mm | |
| Standards/Approvals | No | |
| Number of Words | 8K | |
| Maximum Random Access Time | 8ns | |
| Series | S25FL064L | |
| Number of Bits per Word | 8 | |
| Supply Current | 30mA | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type Flash Memory | ||
Memory Size 64MB | ||
Interface Type SPI, QPI, Parallel | ||
Package Type USON | ||
Pin Count 8 | ||
Organisation 8M x 8 Bit | ||
Maximum Clock Frequency 108MHz | ||
Mount Type Surface | ||
Cell Type NOR | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 4 mm | ||
Height 0.55mm | ||
Length 4mm | ||
Standards/Approvals No | ||
Number of Words 8K | ||
Maximum Random Access Time 8ns | ||
Series S25FL064L | ||
Number of Bits per Word 8 | ||
Supply Current 30mA | ||
Automotive Standard AEC-Q100 | ||
The Cypress FL-L Family devices are Flash Nonvolatile Memory products using: Floating Gate technology,65-nm process lithography The FL-L family connects to a host system via a Serial Peripheral Interface (SPI). Traditional SPI single bit serial input and output (Single I/O or SIO) is supported as well as optional two bit (Dual I/O or DIO) and four bit wide Quad I/O (QIO), and Quad Peripheral Interface (QPI) commands. In addition, there are Double Data Rate (DDR) read commands for QIO and QPI that transfer address and read data on both edges of the clock. The architecture features a Page Programming Buffer that allows up to 256-bytes to be programmed in one operation and provides individual 4 KB sector, 32 KB half block sector, 64 KB block sector, or entire chip erase. By using FL-L family devices at the higher clock rates supported, with Quad commands, the instruction read transfer rate can match or exceed traditional parallel interface, asynchronous, NOR Flash memories, while reducing signal count dramatically. The FL-L family products offer high densities coupled with the flexibility and fast performance required by a variety of mobile or embedded applications. Provides an ideal storage solution for systems with limited space, signal connections, and power. These memories offer flexibility and performance well beyond ordinary serial flash devices. They are ideal for code shadowing to RAM, executing code directly (XIP), and storing re-programmable data.
Liens connexes
- Infineon NOR 64 MB SPI Parallel Flash Memory 8-Pin USON
- Infineon NOR 64 MB QPI SPI Flash Memory 8-Pin USON, S25FL064LABNFV040
- Winbond NOR 1 MB SPI Flash Memory 8-Pin USON
- Winbond NOR 4 MB SPI Flash Memory 8-Pin USON
- Infineon NOR 64 MB SPI Flash Memory 8-Pin USON
- Winbond NOR 2 MB SPI Flash Memory 8-Pin USON
- Winbond NOR 2 MB SPI Flash Memory 8-Pin USON, W25X20CLUXIG
- Winbond NOR 1 MB SPI Flash Memory 8-Pin USON, W25X10CLUXIG
