Microchip Split Gate 32 MB SPI Flash Memory 8-Pin SOIJ
- N° de stock RS:
- 177-9838P
- Référence fabricant:
- SST26VF032BT-104I/SM
- Fabricant:
- Microchip
Offre groupée disponible
Sous-total 25 unités (conditionné en bande continue)*
46,20 €
(TVA exclue)
55,90 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 1 165 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 25 - 95 | 1,848 € |
| 100 + | 1,784 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-9838P
- Référence fabricant:
- SST26VF032BT-104I/SM
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Flash Memory | |
| Memory Size | 32MB | |
| Interface Type | SPI | |
| Package Type | SOIJ | |
| Pin Count | 8 | |
| Organisation | 4M x 8 bit | |
| Maximum Clock Frequency | 104MHz | |
| Mount Type | Surface | |
| Cell Type | Split Gate | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | 2.3V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 5.25 mm | |
| Height | 1.98mm | |
| Length | 5.26mm | |
| Standards/Approvals | No | |
| Series | SST26 | |
| Supply Current | 20mA | |
| Automotive Standard | AEC-Q100 | |
| Number of Bits per Word | 8 | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Flash Memory | ||
Memory Size 32MB | ||
Interface Type SPI | ||
Package Type SOIJ | ||
Pin Count 8 | ||
Organisation 4M x 8 bit | ||
Maximum Clock Frequency 104MHz | ||
Mount Type Surface | ||
Cell Type Split Gate | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage 2.3V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 5.25 mm | ||
Height 1.98mm | ||
Length 5.26mm | ||
Standards/Approvals No | ||
Series SST26 | ||
Supply Current 20mA | ||
Automotive Standard AEC-Q100 | ||
Number of Bits per Word 8 | ||
The SST26VF032B Serial Quad I/O (SQI) flash device utilizes a 4-bit multiplexed I/O serial interface to boost performance while maintaining the compact form factor of standard serial flash devices. SST26VF032B also support full command-set compatibility to traditional Serial Peripheral Interface (SPI) protocol. Operating at frequencies reaching 104 MHz, the SST26VF032B enables minimum latency execute-in-place (XIP) capability without the need for code shadowing on an SRAM.
Serial Interface Architecture- Nibble-wide multiplexed I/O’s with SPI-like serial command structure
Burst Modes- Continuous linear burst, 8/16/32/64 Byte linear burst with wrap-around
Flexible Erase Capability- Uniform 4 KByte sectors, Four 8 KByte top and bottom parameter overlay blocks, One 32 KByte top and bottom overlay block, Uniform 64 KByte overlay blocks
Software Write Protection- Individual Block-Locking
Low Power Consumption
SFDP (Serial Flash Discoverable Parameters)