Festo MS Filter Regulator, 40 μm, 1/2 in, Manual, 18 bar, 8025357

Voir la catégorie

Sous-total (1 unité)*

356,98 €

(TVA exclue)

431,95 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 1 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +356,98 €

*Prix donné à titre indicatif

N° de stock RS:
136-7054
Numéro d'article Distrelec:
301-69-031
Référence fabricant:
MSB6-1/2:C3:J1:F12-WP
Fabricant:
Festo
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Festo

Port Size

1/2 in

Product Type

Filter Regulator

Maximum Operating Pressure

18 bar

Maximum Flow Rate

4500L/min

Connection Thread Standard

G

Series

MS

Drain Type

Manual

Filtration Size

40μm

Pressure Gauge Port Size

1/2 in

Minimum Operating Temperature

0°C

Maximum Operating Temperature

50°C

Standards/Approvals

RoHS, ISO

Pressure Gauge Port Thread Standard

G

Pressure Setting Range

0.8 to 18 bar

Bowl Material

Plastic

Model Number

8025357

Pays d'origine :
HU

Festo MS Filter Regulator, 1/2 inches Port Size, 0.8 to 18 Bar Pressure Setting Range - MSB6-1/2:C3:J1:F12-WP, Numeric Part Number:8025357


This filter regulator is a combined Air preparation unit designed to remove particulate contamination and provide adjustable downstream pressure for pneumatic systems. It is intended for industrial automation and mechanical applications where controlled Air quality and pressure regulation are required, supporting operations in environments that demand standard-compliant components.

Features and Benefits:


• 40 μm element removes fine particulates to protect valves and actuators
• Up to 4500 L/min flow supports high-demand Air supplies
• Pressure adjustable between 0.8 and 10–18 bar for precise control
• Polycarbonate bowl with manual drain allows Visual monitoring and easy maintenance
• 1/2 in G-thread ports enable straightforward integration with common pneumatic fittings
• Rated for operation from 0 °C to 50 °C to suit typical plant conditions

Applications


• Suitable for feed to pneumatic actuators and valves in assembly lines
• Ideal for compressed Air supplies to control cabinets and manifolds
• Used with high-flow blow-off and Air-cleaning stations
• Can be used for instrument Air where particulate removal is essential
• Suitable for retrofit of existing 1/2 in G-threaded pneumatic networks

What connection type is required to install this unit in an existing line?


It requires G-standard threaded ports sized at 1/2 in for both process and gauge connections, matching common BSPP fittings.

How is condensate removed from the bowl during operation?


The bowl is emptied via a manual drain mechanism allowing controlled discharge without tools.

What temperature range should be observed for reliable performance?


The unit is specified to operate between 0 °C and 50 °C, installing outside this range may affect material and regulator behaviour.

Which approvals indicate suitability for industrial installations?


The product conforms to RoHS restrictions and meets ISO standards relevant to its category.

How does the bowl material affect inspection and durability?


The transparent polycarbonate construction permits Visual assessment of collected debris while providing impact-resistant service within the stated temperature limits.

Standards

Compressed Air to ISO 8573-1:2010 [-:4:-] inert gases.

Liens connexes