Festo MS Filter Regulator, 40 μm, G1/8 in, Manual, 14 bar, 8232859

Sous-total (1 unité)*

56,93 €

(TVA exclue)

68,89 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Stocké-e par le fabricant
  • Prêt à être expédié à partir du 07 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +56,93 €

*Prix donné à titre indicatif

N° de stock RS:
793-116
Référence fabricant:
MS4-LFR-1/8-D7-E-R-M-VS
Fabricant:
Festo
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Festo

Port Size

G1/8 in

Product Type

Filter Regulator

Maximum Flow Rate

900L/min

Maximum Operating Pressure

14 bar

Series

MS

Connection Thread Standard

G

Drain Type

Manual

Filtration Size

40μm

Pressure Gauge Port Size

1/8 in

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

60°C

Standards/Approvals

ISO 8573-1:2010

Bowl Material

Polycarbonate

Model Number

8232859

Pressure Gauge Port Thread Standard

G

Pressure Setting Range

0.5 → 12 bar

Pays d'origine :
HU

Festo Series MS Filter Regulator, 0.50 to 12 bar Pressure regulation range, 40μm filtration size - MS4-LFR-1/8-D7-E-R-M-VS, Numeric Part Number: 8232859


This filter regulator provides pressure control and particulate removal for compressed Air systems, delivering a consistent downstream pressure while removing condensate and solids. Designed for vertical mounting, it is suitable for use with compressed Air and inert gases within typical industrial ambient and media temperature limits. Materials include a die-cast aluminium housing with a polycarbonate bowl and NBR Seals to suit moderate corrosion environments and compliance with ISO 8573-1:2010 Air treatment classifications.

Features and Benefits:


• 900 L/min standard flow rate for high-throughput applications
• 0.5 to 12 bar regulation range for precise pressure control
• 40 μm filtration size to remove fine particulates from Air
• Manual drain design enables simple condensate removal
• G1/8 pneumatic ports provide standard G thread connectivity

Applications


• Suitable for pneumatic tool feed lines in production cells
• Used with Air actuators requiring stable output pressure
• Ideal for compressed Air preparation in assembly machinery
• Can be used for inert gas pressure conditioning in laboratories

What materials contact the medium and affect chemical compatibility?


The medium contacts a die-cast aluminium housing, Makrolon® polycarbonate bowl, NBR membrane and seals, and a POM separating plate which determine compatibility.

How does the unit handle condensate separation and capacity?


Condensate separation exceeds 75% with a maximum condensate bowl volume of 19 ml and a rotating manual drain for discharge.

What mounting orientation and installation interfaces are required?


It is intended for vertical mounting within ±5° and connects via G1/8 ports with a 1/8 in pressure gauge port thread standard for gauge fitting.

Which environmental ranges apply to storage and operation?


Storage, ambient and media temperature limits are -10 °C to 60 °C and operating pressure ranges from 0.08 MPa to 1.4 MPa.

What performance tolerance exists for pressure stability?


Maximum pressure hysteresis is 0.025 MPa (0.25 bar), supporting steady regulated output.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.